HOSE AS-GREASE 1972479 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Illustration 1 g03395406
Remove bolts (3).
Attach Tooling (A) and a suitable lifting device to shell assembly (2). Shell Assembly weighs approximately 60 kg (133 lb).
Remove bolts (1).
Illustration 2 g03395620
Remove bolts (4).
Illustration 3 g03395806
Remove bolts (6) and elbow (5).
Remove engine oil cooler assembly (2). Installation Procedure
Install engine oil cooler assembly (2) in the reverse order of removal.