1978788 HOSE AS Caterpillar parts
3608
Rating:
Alternative (cross code) number:
CA1978788
197-8788
1978788
CA1978788
197-8788
1978788
Weight: 0.100 pounds 0 kg.
MARINE AUXILIARY,
Compatible equipment models: 1978788:
Number on catalog scheme:
4
For full view, you need register
Information:
diagnostic code is recorded when the VIMS main module can not communicate with the analysis control ECM through the CAT data link.This diagnostic code results in failed VIMS operations that are related to the analysis control ECM. The VIMS operations may work intermittently.
VERIFY THE HARDWARE AND THE SOFTWARE PART NUMBERS.
Verify that the following information is correct:
The part number of the VIMS configuration software
The part number of the analysis control ECM flash software.
The part number of the VIMS main module
The part number of the analysis control ECM Note: Consult the Business Unit that produces the product for the correct part numbers of the configuration software. Expected Result: All part numbers are correct. Results:
OK - All part numbers are correct. Proceed to 2.
NOT OK - All part numbers are NOT correct. The installed VIMS main module or the analysis control ECM has the wrong part number or the incorrect configuration software is installed. Replace the incorrect VIMS main module or the analysis control ECM with a module that has the correct part number. Flash the correct configuration software. STOP.
INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Inspect all harness connections that are related to the CAT data link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating.
Check the wires at the connector.
Check each wire for nicks or signs of abrasion in the insulation.
Check for moisture at the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Expected Result: The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to 3.
NOT OK - The machine harness connectors are in need of repair. Repair the machine harness or replace the machine harness. STOP.
CHECK FOR SHORTS TO GROUND
The disconnect switch remains in the OFF position.
Disconnect the machine harness from all electronic control modules that use the CATdata link.
At the machine harness for the VIMS main module, measure the resistance between frame ground and connector contacts 6 (wire 882-PK) and 7 (wire 893-GY) of the CAT data link circuit. Expected
VERIFY THE HARDWARE AND THE SOFTWARE PART NUMBERS.
Verify that the following information is correct:
The part number of the VIMS configuration software
The part number of the analysis control ECM flash software.
The part number of the VIMS main module
The part number of the analysis control ECM Note: Consult the Business Unit that produces the product for the correct part numbers of the configuration software. Expected Result: All part numbers are correct. Results:
OK - All part numbers are correct. Proceed to 2.
NOT OK - All part numbers are NOT correct. The installed VIMS main module or the analysis control ECM has the wrong part number or the incorrect configuration software is installed. Replace the incorrect VIMS main module or the analysis control ECM with a module that has the correct part number. Flash the correct configuration software. STOP.
INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Inspect all harness connections that are related to the CAT data link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating.
Check the wires at the connector.
Check each wire for nicks or signs of abrasion in the insulation.
Check for moisture at the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Expected Result: The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to 3.
NOT OK - The machine harness connectors are in need of repair. Repair the machine harness or replace the machine harness. STOP.
CHECK FOR SHORTS TO GROUND
The disconnect switch remains in the OFF position.
Disconnect the machine harness from all electronic control modules that use the CATdata link.
At the machine harness for the VIMS main module, measure the resistance between frame ground and connector contacts 6 (wire 882-PK) and 7 (wire 893-GY) of the CAT data link circuit. Expected
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
3176B, 3176C, 3196, 3304, 3306, 3306B, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508C, 3512, 3516, 3516B, 3606, 3608, 3612, 3616, 613B, 613C, 627F, 627G, 637E, ...
215, 215B, 3126, 3126B, 3126E, 3208, 3304, 3306, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 834B, ...
225D, 3116, 3208, 3406, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 3618, C18, C280-12, C280-16, C280-6, C280-8, C30, C3...
227, 3304, 3408, 3412, 3412C, 3412D, 3508, 3508C, 3512, 3512B, 3516, 3516B, 3606, 3608, 3612, 3616, C280-16, G3406, PM3412, PR-1000, PR-750B
3176C, 3196, 3208, 3406, 3406B, 3406C, 3408, 3412C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 3618, C-10, C-12, C15, C18, C280-12, C280-16, C280-6, C280-8, C3...
7V1073
HOSE AS
225, 3408, 3408C, 3408E, 3412E, 3512, 3606, 3608, 3612, 3616, 3618, C27, C280-12, C280-16, C280-6, C280-8, C32
225, 3408, 3408C, 3408E, 3412E, 3512, 3606, 3608, 3612, 3616, 3618, C27, C280-12, C280-16, C280-6, C280-8, C32
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 3618, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789...
225, 227, 3406B, 3406C, 3406E, 3412, 3456, 3508, 3512, 3512B, 3516, 3606, 3608, 3612, 3616, 5230, 5230B, 776, 776C, 776D, 777, 777B, 777D, 777F, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793B, 793...
3114, 3116, 3126, 3208, 3606, 3608, 3612, 3616, 3618, 777C, 777D, 777F, C280-12, C280-16, C280-6, C280-8, CS-583, D11T, G3606, G3606B, G3608, G3612, G3616
1283981
HOSE AS
3608
3608
1419404
HOSE AS
3608
3608
1317865
HOSE AS
3608
3608
1978787
HOSE AS
3608
3608
2016680
HOSE AS
3608
3608
1906136
HOSE AS
3608
3608
3452922
HOSE AS
3608
3608
1480168
HOSE AS
3606, 3608, 3612, 3616, 735, 735B, 740, 740B, C280-12, C280-16, C280-6, C280-8
3606, 3608, 3612, 3616, 735, 735B, 740, 740B, C280-12, C280-16, C280-6, C280-8
2060275
HOSE AS
3608
3608
2039069
HOSE AS
3608
3608
2039068
HOSE AS
3608
3608
2039066
HOSE AS
3608
3608
2039064
HOSE AS
3608, 3612, 3616, C280-12, C280-16
3608, 3612, 3616, C280-12, C280-16
2039063
HOSE AS
3406C, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3520B
3406C, 3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3520B
1546566
HOSE AS
3608, 3612, 3616, C280-12, C280-16
3608, 3612, 3616, C280-12, C280-16