HOSE AS 1991627 - Caterpillar

Illustration 12 g01004357
Install the access covers to both sides of the engine. Remove bolt (49) from the flywheel and install plug (50), cover (48), and bolts (49).
Illustration 13 g01002800
Install speed sensor (31). Refer to Systems Operation, "Engine Speed/Timing Sensor".
Illustration 14 g01229467
Install cover assemblies (29).
Illustration 15 g00998311
Install brackets (26).
Illustration 16 g00998309
Position bracket (25).
Install bolts (24).
Illustration 17 g00998308
Position engine monitoring control (21) and bracket (23).
Install bolts (22).
Connect harness assemblies (20) to engine monitoring control (21).
Illustration 18 g00998306
Illustration 19 g00998307
Position bracket assembly (19).
Install bolts (18).
Illustration 20 g00998304
Attach Tooling (B) and a suitable lifting device to regulator housing assembly (16). The weight of regulator housing assembly (16) is approximately 100 kg (220 lb).
Position regulator housing assembly (16).
Illustration 21 g00998305
Install bolts (17).
Illustration 22 g00998303
Position connector (14) and the O-ring seal.
Install bolts (15).
Connect harness assemblies (13).
Position adapter (12) and the gaskets.
Install bolts (11).
Illustration 23 g00998302
Position connector (9) and the O-ring seals.
Install bolts (10).
Position elbow (7) and the gaskets.
Install bolts (6) and bolts (8).
Illustration 24 g00998300
Attach Tooling (B) and a suitable lifting device to bracket (3). The weight of bracket (3) is approximately 36 kg (80 lb).
Position bracket (3).
Install bolts (5).
Connect harness assemblies (4) onto bracket (3).
Position harness assemblies (2) onto bracket (3).
Connect harness assemblies (2).
Illustration 25 g01229405
Install cover (1). End By:
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Push Rod - Install".
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Install".