1W4877 HOSE-REDUCER Caterpillar parts
245B, 3306, 3406, C-9, D6R, D6R III, D6R STD, D6T, D7R XR, G3406, TH48-E70
Rating:
Alternative (cross code) number:
CA1W4877
1W-4877
1W4877
CA1W4877
1W-4877
1W4877
Weight: 0.50 pounds 0 kg.
Information:
ID
127
mm
LENGTH
90
mm
EXCAVATOR, TRACK-TYPE TRACTOR,
Compatible equipment models: 1W4877:
Number on catalog scheme:
11
For full view, you need register
Information:
1400 Frame Rear Bearing Removal and Installation
Required Tooling
Table 1
Qty Part Number Description
1 FT3109 Puller Assembly Bearing Removal
Illustration 1 g01450316
Puller Assembly
Some generators are equipped with a "Resistance Temperature Detector" (RTD). The RTD must be removed from the end bracket or front bracket before the bracket is removed. If the RTD is not removed before the bracket is removed, then the RTD will be damage.
Remove the end bracket. Refer to the information that is in the "End Bracket - Remove" section for end bracket removal information.
Install the M20 bolt (10) into the threaded hole that is in the rotor shaft.
Install the FT3109 Puller (11). Refer to Illustration 2.
Illustration 2 g01450276
(10) Bolt in the End of the Main Rotor Shaft.
(11) Puller Assembly
(12) Bearing Sleeve
(13) Exciter End of Main Rotor Shaft
(14) Puller Assembly Threaded Rods Note: Four M10 threaded rods are required.
Remove the bearing assembly.
Remove the bearing (17) from the bearing sleeve (18).
Illustration 3 g01450281
(17) Bearing
(18) Bearing Sleeve
Remove the O-ring seal and the wave washer from the end bracket. Refer to the "End Bracket - Remove" section of this publication. Bearing Installation
On the
Required Tooling
Table 1
Qty Part Number Description
1 FT3109 Puller Assembly Bearing Removal
Illustration 1 g01450316
Puller Assembly
Some generators are equipped with a "Resistance Temperature Detector" (RTD). The RTD must be removed from the end bracket or front bracket before the bracket is removed. If the RTD is not removed before the bracket is removed, then the RTD will be damage.
Remove the end bracket. Refer to the information that is in the "End Bracket - Remove" section for end bracket removal information.
Install the M20 bolt (10) into the threaded hole that is in the rotor shaft.
Install the FT3109 Puller (11). Refer to Illustration 2.
Illustration 2 g01450276
(10) Bolt in the End of the Main Rotor Shaft.
(11) Puller Assembly
(12) Bearing Sleeve
(13) Exciter End of Main Rotor Shaft
(14) Puller Assembly Threaded Rods Note: Four M10 threaded rods are required.
Remove the bearing assembly.
Remove the bearing (17) from the bearing sleeve (18).
Illustration 3 g01450281
(17) Bearing
(18) Bearing Sleeve
Remove the O-ring seal and the wave washer from the end bracket. Refer to the "End Bracket - Remove" section of this publication. Bearing Installation
On the
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
D6H, D6H II, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
D6H, D6H II, D6H XL, D6H XR, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL
D6R, D6R III, D7R, D7R II
D6R, D6R II, D6R III, D6T
D6R, D6R II, D6R III, D6T, D8L
D6R, D6R II, D6R III, D6R STD, D6T
24M, D6R, D6R II, D6R III, D6R STD, D6T
D6R, D6R II, D6R III, D6R STD, D6T, D7R XR
D6R III
D6R, D8L, D9N, D9R
D7H, D7R, D7R II, D7R XR, D8N
D7R II, D7R XR, D8R, D8R II, D8T
3306, 3306B, 725, 730, 980, 980C, D8N, TH48-E70
120B, 120G, 130G, 140B, 140G, 14M, 160G, 215, 225, 235, 3304, 3304B, 3306, 3406, 3406E, 528, 528B, 530B, 561D, 571G, 572G, 594H, 627B, 769D, 771D, 772B, 773B, 776, 776C, 776D, 777, 777B, 777D, 789, 78...
225, 3304, 3304B, 3306, 3306B, 824B, 988, G3304, G3306, G398, G399
120M, 12M, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 235C, 236, 236B, 236B3, 236D, 2384C, 2390, 2391, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 2484C, 2491, 252B, 252B3, 256C, 257B, ...
1409038
HOSE-RADIATOR
3304B, 3306, 3306B
3304B, 3306, 3306B
1407364
HOSE-RADIATOR
3304, 3304B, 3306, 3306B
3304, 3304B, 3306, 3306B
3116, 3306, 3306C
4W0505
HOSE
3306, 3306B
3306, 3306B
12G, 12H, 12H ES, 12H NA, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 330B, 330B L, 525, 527, 52...
140B, 3306, 3306B, 528, 528B, 530B, 815, 966C, 977K, 977L, D6C, D6D, D6E, D6E SR, D6G, D6G SR, D6G2 XL
3306, 3306B, 3508, 3508B, 3512, 3512B, 3516, 3516B, 572R, 572R II, 611, 615, 615C, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637D, 637E, 637G, 776, 777, D10, D11N, D11...
5N4742
HOSE-EXHAUST
3176C, 3196, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3406E, 3456, 3508B, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31-C15I, CX31-C9...
3176C, 3196, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3406E, 3456, 3508B, 65C, 65E, 75C, 75D, 75E, 85C, 85D, 85E, 95E, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31-C15I, CX31-C9...