2007844 HOSE AS Caterpillar parts
330B L
Rating:
Alternative (cross code) number:
CA2007844
200-7844
2007844
CA2007844
200-7844
2007844
EXCAVATOR,
Compatible equipment models: 2007844:
Number on catalog scheme:
11
For full view, you need register
Information:
* Both the On-The-Go and Stationary calibrations must be performed after installation. MACHINE MUST REMAIN STATIONARY DURING ALL CALIBRATION PROCEDURES. Perform daily until you are sure of system, then as needed.Calibration can be performed in any order. The following order of calibration is suggested.1. Empty Bucket On-The-Go.2. Empty Bucket Stationary.3. Full Bucket On-The-Go.4. Full Bucket Stationary. Calibration requires the use of a known weight. ( 10% of rated load).Following are three ways to obtain a known weight in the bucket.1. Solid calibration weight. Fabricate a concrete or steel tube of the specified diameter for the given model and fill with concrete. The following illustration and chart give the dimensions needed to fabricate the tube.
Refer to Calibration Pipe Weights Chart for dimensions.
(A) Diameter. (B) Length. 2. Bucket load of material, weighed in the loader bucket on truck scales.3. Bucket load of material, weighed using an empty truck with a known tare weight. An empty truck can be used to obtain the weight if the loader cannot fit on the scale. Wait for the scalehouse to return a weight and match the display to that weight. Do not move lift arms until after weight adjustment and switch is returned to the NORMAL position. Another source of weight can be used, but should be 10% of bucket rated load and of a shape that can be loaded with the center of gravity in the center of the bucket, (approximately a bucket load of material).Ride Control
Units equipped with ride control should calibrate the PMS in the same mode as you will use the ride control.* If you operate with the ride control ON: Calibrate and weigh with the ride control ON.* If you operate with the ride control OFF: Calibrate and weigh with the ride control OFF. Inaccurate readings may take place if the above instructions are not followed.
Refer to Calibration Pipe Weights Chart for dimensions.
(A) Diameter. (B) Length. 2. Bucket load of material, weighed in the loader bucket on truck scales.3. Bucket load of material, weighed using an empty truck with a known tare weight. An empty truck can be used to obtain the weight if the loader cannot fit on the scale. Wait for the scalehouse to return a weight and match the display to that weight. Do not move lift arms until after weight adjustment and switch is returned to the NORMAL position. Another source of weight can be used, but should be 10% of bucket rated load and of a shape that can be loaded with the center of gravity in the center of the bucket, (approximately a bucket load of material).Ride Control
Units equipped with ride control should calibrate the PMS in the same mode as you will use the ride control.* If you operate with the ride control ON: Calibrate and weigh with the ride control ON.* If you operate with the ride control OFF: Calibrate and weigh with the ride control OFF. Inaccurate readings may take place if the above instructions are not followed.
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
12G, 12H, 12H ES, 12H NA, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 330B, 330B L, 525, 527, 52...
307C, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 32...
307C, 308D, 311F LRR, 312D, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318C, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 3...
307C, 312C, 312C L, 315C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 322 LN, 322B, 322B L, 322B LN, 322C, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 345B II, 345B L, 385B, 385C, 385C...
307C, 308C, 311C, 311D LRR, 311F LRR, 312C, 312D, 312D L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320D FM RR, 320D L, 320D LN, 320D...
315C, 318C, 319C, 320 L, 320B, 320C, 320E LN, 322, 322 FM L, 322 LN, 323E L, 325, 325 L, 325B, 325B L, 329E, 330, 330B, 330B L, 330C, 330C L, 336E, 345B L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L,...
314C, 318C, 319C, 320B, 320B U, 320C, 321C, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D, ...
314C, 320B, 320B L, 320C, 320C FM, 320C L, 330 FM L, 330 L, 330B, 330B L, W330B
318C, 320B, 320B U, 320C, 320C FM, 320C L, 321B, 321C, 322B, 322C, 325B, 325C, 330B L, 330C, OEMS
318C, 319C, 320B, 320C, 320D FM RR, 320D L, 320D LN, 320D LRR, 320D RR, 320E LRR, 320E RR, 321C, 322B LN, 322C, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D L, 325B L, 325C, 325D, 325D L, 328D LCR, 3...
318C, 320B, 320B FM LL, 320C, 322B, 322B L, 322B LN, 322C, 325B, 325B L, 325C, 330B, 330B L, 345B II, 345B L, M325B, W330B
330B, 330B L
2007843
HOSE AS
330B L
330B L
1407234
HOSE AS
330B L, W330B
330B L, W330B
1479645
HOSE AS
330B L, W330B
330B L, W330B
1124464
HOSE AS
330B L, W330B
330B L, W330B
1492608
HOSE AS
330B L, W330B
330B L, W330B
1492606
HOSE AS
330B L, W330B
330B L, W330B
1442462
HOSE AS
330B L
330B L
1597914
HOSE AS
330B L, M325C MH
330B L, M325C MH
1598014
HOSE AS
330B L
330B L
1381417
HOSE AS
330B L
330B L
330B, 330B L, W330B
330B, 330B L, 365C, 365C L, W330B