2058340 HOSE AS Caterpillar parts
525B
Rating:
Alternative (cross code) number:
CA2058340
205-8340
2058340
CA2058340
205-8340
2058340
WHEEL SKIDDER,
Compatible equipment models: 2058340:
Number on catalog scheme:
21
For full view, you need register
Information:
The Electronic Control Module (ECM) detects one of the following conditions. The turbocharger compressor outlet pressure is 15 kPa (2.1 psi) from the atmospheric pressure. The turbocharger outlet pressure is less than 35 kPa (5 psi). The turbocharger outlet pressure is greater than 122 kPa (17 psi). The turbocharger outlet pressure changed more than 10 kPa (1.4 psi) during a calibration attempt. A pressure calibration has not been performed on a new ECM. A manual calibration failed. The diagnostics 273-03 or 273-04 are active.System Response:The CID-FMI may be viewed on the display modules or the Caterpillar Electronic Technician (ET). The diagnostic codes are active. The diagnostic codes are not logged in memory.Test Step 1. Perform the following diagnostic procedure: "Analog Sensor - Calibrate"Results:
OK - STOP
REPAIRED, OK - STOP
OK - STOP
REPAIRED, OK - STOP