HOSE AS 2060061 - Caterpillar

Illustration 1 g00586475
Remove eight bolts (1), the washers, and screen (2) from the radiator guard assembly. Remove six bolts (3), the washers, and screen (4) from the radiator guard assembly.
Illustration 2 g00585246
Open the lower door on the left side of the machine in order to access the alternator. Remove two nuts (5) and the washers that secure guard assembly (6) to alternator (7). Remove guard assembly (6) from alternator (7) .
Illustration 3 g00585248
Remove two spacers (8) from the two bolts. Adjust two nuts (9) along the rod in order to remove alternator belt (10). Rotate alternator (7) toward the engine. Remove alternator belt (10) from pulley (11) .
Illustration 4 g00585249
Remove bolt (12) and the washer that secures cable assembly (13) to alternator (7). Disconnect cable assembly (13) from alternator (7). Remove cap (14) and disconnect the wire from the alternator.
Illustration 5 g00585252
Remove nut (15) and the washer in order to disconnect grounding strap (16) from the alternator.
Illustration 6 g00586397
Remove two bolts (17) and the washers that secure alternator (7) to the mounting bracket. Remove alternator (7) from the mounting bracket.Installation Procedure
Verify that all of the components of the alternator are clean and free of foreign material prior to installation.
Illustration 7 g00586397
Position alternator (7) to the mounting bracket. Install two bolts (17) and the washers that secure alternator (7) to the mounting bracket.
Illustration 8 g00585252
Position grounding strap (16) to the alternator. Install nut (15) and the washer that secures grounding strap (16) to the alternator.
Illustration 9 g00585249
Connect the wire to the alternator and install cap (14). Position cable assembly (13) to alternator (7). Install bolt (12) and the washer that secures cable assembly (13) to alternator (7). Tighten bolt (12) to a torque of 6.2 0.6 N m (55 5 lb in).
Illustration 10 g00585248
Install alternator belt (10) to pulley (11). Rotate alternator (7) away from the engine. Install two spacers (8) to the two bolts. Adjust two nuts (9) along the rod in order to tighten alternator belt (10) .
Illustration 11 g00585246
Position guard assembly (6) to alternator (7). Install two nuts (5) and the washers that secure guard assembly (6) to alternator (7). Refer to Operation and Maintenance Manual, "Alternator and Fan Belts - Inspect/Adjust/Replace" for the appropriate belt tension and the correct procedure. Close the lower door on the left side of the machine.
Illustration 12 g00586475
Install six bolts (3), the washers, and screen (4) to the radiator guard assembly. Install eight bolts (1), the washers, and screen (2) to the radiator guard assembly.End By:
Separate the frame lock link. Refer to Disassembly and Assembly, "Frame Lock Link - Separate and Connect".
Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".