HOSE 2167953 - Caterpillar

Joystick Control Selector (If Equipped)
Illustration 1 g00923695
The joystick control selector is located under the left side of the cab.
Illustration 2 g00555084
The machine may be equipped with a joystick control selector. The machine control pattern can be varied by turning the valve underneath the left side of the cab. Position (1) is the factory setting. This is the standard position. Position (2) is the alternate position. The alternate position allows the operator to change the functions of the joysticks.Alternate Joystick Control Pattern
Illustration 3 g01035070
Left hand joystick
BOOM LOWER (3) - Move the joystick to this position in order to lower the boom.
SWING RIGHT (4) - Move the joystick to this position in order to swing the upper structure to the right.
BOOM RAISE (5) - Move the joystick to this position in order to raise the boom.
SWING LEFT (6) - Move the joystick to this position in order to swing the upper structure to the left. HOLD (7) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.
Illustration 4 g01035072
Right hand joystick
STICK OUT (8) - Move the joystick to this position in order to move the stick outward.
BUCKET DUMP (9) - Move the joystick to this position in order to dump the bucket or the work tool.
STICK IN (10) - Move the joystick to this position in order to move the stick inward.
BUCKET CLOSE (11) - Move the joystick to this position in order to close the bucket or the work tool. HOLD (12) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.