HOSE AS 2184488 - Caterpillar

1. Put a floor jack in position under guard (1). Remove the six bolts that hold the guard in position. Lower the guard and remove it from under the machine. Weight of the guard is 105 lb. (48 kg). 2. Remove two bolts (2) from the bracket on each side of the crankcase guard (rear). 3. Put a floor jack in position under the crankcase guard (rear). Remove the three nuts (3) from each side of the crankcase guard (rear) (4). Lower the crankcase guard and remove it from under the machine. Weight of the crankcase guard (rear) is 700 lb. (318 kg).Install Crankcase Guard (Rear)
1. Put crankcase guard (1) on a floor jack. Lift the crankcase guard (1) until it makes contact with the frame of the machine. Install the six bolts and nuts that hold it in position. Remove the floor jack. Install the two bolts in the rear bracket of crankcase guard (1).2. Put the guard that covers the equalizer bar on a floor jack. Lift the guard until it makes contact with the front and rear crankcase guards. Install the six bolts that hold it.