HOSE 2186274 - Caterpillar

Installation Procedure
Slowly drive the machine toward the blade so that the push arms are engaged with the trunnion.
Illustration 1 g00882540
Install bolts (12), shims (10), and cap (11) to the push arms on both sides of the machine.
Tighten bolts (12) to a torque of 1800 200 N m (1330 150 lb ft).
Illustration 2 g00882538
Connect hose assemblies (9) on both sides of the machine.
Illustration 3 g00882529
Connect four hose assemblies (8).
Illustration 4 g00882518
Start the engine. Extend lift cylinder rod (6).
Stop the engine.
Install bolts (4), shims (5), and cap (7).
Illustration 5 g00882517
Use a hoist in order to raise the stabilizer into position on the machine.
Illustration 6 g00882514
Install pin (3) to the stabilizer and to the blade.
Illustration 7 g00882511
Install bolts (2) and retainer (1) to pin (3).
Tighten bolts (2) to a torque of 530 70 N m (391 52 lb ft).