HOSE AS 2198120 - Caterpillar

Illustration 25 g06080821
(23) 488-5161 Shield As
Install shield assembly (23).
Illustration 26 g06080903
Looking up from the bottom.
(24) 488-5162 Shield As
Illustration 27 g06080844
Looking up from the bottom.
(24) 488-5162 Shield As
Install shield assembly (24).
Illustration 28 g06080916
(23) 488-5161 Shield As
(25) 487-4638 Shield As
Install shield assembly (25).
Illustration 29 g06080918
(25) 487-4638 Shield As
(26) 487-4639 Shield As
Install shield assembly (26).
Illustration 30 g06080920
(27) 487-4637 Shield As
Install shield assembly (27).
Illustration 31 g06080922
Looking up from the bottom.
(28) 487-4634 Shield As
Install shield assembly (28).
Illustration 32 g06080924
(29) 487-4635 Shield As
Install shield assembly (29).
Illustration 33 g06132520
(30) 487-4643 Heat Shield As
(31) 486-9778 Shield As
(32) 335-3377 Gasket
(33) 9L-2295 High Temperature Bolt
(34) 110-8314 Washer
(35) 2N-2766 Locknut
(36) 7L-3195 High Temperature Bolt
(37) 486-2894 Bracket
Install heat shield assembly (30).
Attach shield assembly (31) and bracket (37) to the flower pot with one gasket (32), two bolts (33), two bolts (36), four washers (34), and four nuts (35). Refer to Illustration 33 for the correct location of the bolts.Note: Bolt (33) is hidden by bracket (37).
Illustration 34 g06132521
(37) 486-2894 Bracket
(38) 0S-1588 Bolt
(39) 3V-3308 Hard Washer
(40) 9S-8752 Full Nut
(41) 439-1528 Grommet
(42) 8T-1887 Clip
(43) 8T-1888 Clip
(44) 1A-2029 Bolt
Install two grommets (41) around the NOx sensor cable.
Install one clip (42) and one clip (43) around each grommet (41). Refer to Illustration 34 for the correct orientation of the clips.
Attach clips (42) and (43) to bracket (37) with one bolt (38), two washers (39), and one nut (40).
Attach clips (42) and (43) to bracket on the heat shield with one bolt (44), two washers (39), and one nut (40).