HOSE AS. 2211217 - Caterpillar

Illustration 2 g03672837
Right front side of cab (A) Screws
Remove four screws (A) from the cab. Refer to Illustrations 1 and 2
Illustration 3 g03672839
Left front side of cab (12) 240-4630 Plate (13) 241-6978 Tube (LH) (14) 241-8651 Tube As (Upper) (15) 241-8652 Tube As (Lower) (20) 5P-1076 Hard Washer (23) 8T-4139 Bolt
Illustration 4 g03672841
Right front side of cab (11) 240-4557 Tube (RH) (12) 240-4630 Plate (14) 241-8651 Tube As (Upper) (15) 241-8652 Tube As (Lower) (20) 5P-1076 Hard Washer (23) 8T-4139 Bolt
Install the frame for the window guard. Refer to Illustrations 3 and 4Note: Only hand tighten the bolts until the frame and the front guard have been fully assembled.
Install upper tube assembly (14) with four hard washers (20) and four bolts (23) .
Install lower tube assembly (15) with two plates (12) using four hard washers (20) and four bolts (23) .
Install left-hand tube (13) with two hard washers (20) and two bolts (23) .
Install right-hand tube (11) with two hard washers (20) and two bolts (23) .
Illustration 5 g03672843
Front view of cab (8) 240-4548 Grill As (21) 7X-2555 Bolt (24) 9X-8257 Washer
Using a suitable lifting device, install front grill assembly (8) with six washers (24) and six bolts (21) .Note: Only hand tighten the bolts until the frame and the front guard have been fully assembled.
Starting with upper tube assembly (14) and lower tube assembly (15), tighten all bolts that were installed in Steps 2 and 3.
Illustration 6 g03672845
Right view of cab and guard frame (1a) Latch (3) 6C-3678 Rivet (5) 6S-6646 Cotter Pin (6) 7K-6536 Rivet (7) 8G-6035 Clip (16) 244-2539 Rod As (18) 4M-7470 Grommet (22) 8T-4121 Hard Washer
Assemble latch assembly (5) and rod assembly (16) to the guard frame.
Install clip (7) with rivet (6) .
Insert grommet (18) into the bracket of lower tube assembly (15) .
Insert rod assembly (16) into grommet (18) .
Secure rod assembly (16) with hard washer (22) and cotter pin (5) .
Install latch (1a) with two rivets (3) .
Repeat Step 5 for the left-hand side of the guard frame.
Illustration 7 g03672846
View of right grill assembly (1b) Bracket (2) 4E-1384 Conical Bumper (4) 6C-3678 Rivet (9) 240-4551 Grill As (RH) (18) 4M-7470 Grommet (19) 5C-7261 Nut
Assemble hardware onto right grill assembly (9) .
Insert grommet (18) into the bracket of right grill assembly (9) .
Assemble nut (19) with conical bumper (2) and install onto right grill assembly (9) .
Install bracket (1b) onto right grill assembly (9) with two rivets (4) .
Repeat Step 7 for left-hand grill assembly (10) .
Illustration 8 g03672847
Right front view of cab (5) 6S-6646 Cotter Pin (8) 240-4548 Grill As (Front) (9) 240-4551 Grill As (RH) (17) 0S-0175 Clevis Pin
Attach right grill assembly (9) onto front grill assembly (8) with two clevis pins (17) and two cotter pins (5) .
Repeat Step