HOSE AS 2230147 - Caterpillar

Illustration 1 g00730068
Distance (A) from the end of the axle shaft to the clamp ... 1735 5 mm (68.3 0.2 inch) (1) Torque for 4H-6511 Bolts ... 1800 200 N m (1328 148 lb ft) (2) Torque for 205-9874 Speed Sensor ... 30 4 N m (22 3 lb ft)Note: Apply 154-9731 Thread Lock Compound to the threads of 205-9874 Speed Sensor. (3) Torque for 5T-8041 Adapter ... 55 7 N m (41 5 lb ft)Note: Apply 5P-3413 Pipe Sealant to the threads of 5T-8041 Adapter . (4) Torque for 1T-0284 Bolts ... 30 4 N m (22 3 lb ft)Note: Apply 154-9731 Thread Lock Compound to the threads of 1T-0284 Bolts .Note: Stake the top edge of the counterbore in order to retain 1T-0284 Bolts .Adjustment Procedure for the Adapter to the Gear
Illustration 2 g00730069
(3) 5T-8041 Adapter (5) Shims
Measure the distance from the machined counterbore surface to the gear tooth. This distance is distance (B) .
Determine the thickness of 5T-8041 Adapter (3). This thickness is thickness (C) .
Add distance (B) to thickness (C). Subtract this total from 242.03 0.08 mm (9.529 0.003 inch).
Install shim pack (5) that is equal to the difference.The shims that are available to achieve the correct dimension 5T-8042 Shim ... 0.16 mm (0.0063 inch) 5T-8168 Shim ... 0.05 mm (0.0020 inch) 5T-8169 Shim ... 0.80 mm (0.0315 inch)