HOSE AS 2270674 - Caterpillar

Rod Moves Up
Illustration 1 g06248465
Front suspension cylinder operation
(1) Cylinder
(2) Chamber
(3) Rod
(4) Orifice
(5) Drain ball check
(6) Cavity
(AA) Nitrogen
(LL) OilOrifice (4) and drain ball check (5) control the flow rate of the oil from chamber (2) to cavity (6).When a shock load is felt in the rear wheels, the rear wheels will move up. The shock load causes rod (3) to move up in cylinder (1). The movement of rod (3) compresses the nitrogen in chamber (2). Oil flows from chamber (2) to cavity (6) through orifice (4) and through drain ball check (5).The compression of the nitrogen in chamber (2) provides the shock absorber action. The suspension cylinder dampens the amount of the shock load that is felt by the machine frame.Rod Moves Down
Illustration 2 g06248474
Front suspension cylinder operation
(1) Cylinder
(2) Chamber
(3) Rod
(4) Orifice
(5) Drain ball check
(6) Cavity
(AA) Nitrogen
(LL) OilAs the shock load diminishes, the action of the suspension cylinder is reversed. Rod (3) moves out of cylinder (1). The rod moves due to the weight of the wheel, the rear axle, and the pressure of the nitrogen in chamber (2). As rod (3) moves down, the oil volume of cavity (6) decreases and the oil is put under pressure. The flow of oil closes drain ball check (5). The oil pressure in cavity (6) holds drain ball check (5) closed. At this time, oil can only drain to chamber (2) through orifice (4).As rod (3) moves down, the lower orifice is closed and the amount of oil that goes to chamber (2) is decreased. The other orifice is slowly closed off as rod (3) moves down. The movement of the rod decreases the amount of oil that goes to chamber (2). By slowly decreasing the amount of oil that drains to chamber (2), the suspension cylinder reduces the speed of downward movement for rod (3). The slower downward movement reduces the shock load that is created when rod (3) reaches the bottom of cylinder (1).