HOSE AS 2296020 - Caterpillar

Illustration 2 g02176994
Service (see arrow).
Use the arrow buttons on the operator monitor to locate the "Service" icon. The "Service" icon is indicated by the arrow in the graphic above.
Press the "OK" button on the operator monitor.
Illustration 3 g02177005
On the password entry screen enter the code 9992. Press the button on the monitor labeled "ENTER".
Illustration 4 g02596300
Status (see arrow).
Locate "STATUS" on the menu. Press the "OK" key.
Illustration 5 g02596299
TCS Operator Input (see arrow).
Scroll the menu to locate the title "TCS OPERATOR INPUT". Press the "OK" key.
Illustration 6 g02596339
Select the Left Pedal attachment from the menu. Expected Result:During left auxiliary pedal operation, the Monitoring System indicates approximately 100%, when the auxiliary pedal is in the forward position. The indication on the Monitoring System is approximately 0% when the auxiliary pedal is in the neutral position. The indication on the Monitoring System is approximately -100% when the auxiliary pedal is in the reverse position. Results:
OK - During left auxiliary pedal operation, the Monitoring System indicates approximately 100%, when the auxiliary pedal is in the forward position. The indication on the Monitoring System is approximately 0% when the auxiliary pedal is in the neutral position. The indication on the Monitoring System is approximately -100% when the auxiliary pedal is in the reverse position. The auxiliary pedal is working correctly. The diagnostic code is NOT present. The diagnostic code does not exist at this time.Repair: The initial failure was probably caused by a poor electrical connection or a short at one of the harness connectors that was disconnected and reconnected. Resume normal operations. STOP
NOT OK - During left auxiliary pedal operation, the Monitoring System is NOT approximately 100%, when the auxiliary pedal is in the forward position. The indication on the Monitoring System is NOT approximately 0% when the auxiliary pedal is in the neutral position. The indication on the Monitoring System is NOT approximately -100% when the auxiliary pedal is in the reverse position. Repair: Use the operator monitor to calibrate the left attachment pedal. Follow the calibration menu programmed into the operator monitor.After calibration repeat Test Step 10.
Passed Calibration - The attachment pedal has passed calibration.Repair: A failure of the Machine ECM is unlikely. Verify the Cat Data Link circuit. If the Cat Data Link circuit is correct, replace the ECM. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace".STOP