2302829 HOSE-RADIATOR Caterpillar parts
365C, 365C L, 365C L MH, 374D L, 651B
Rating:
Alternative (cross code) number:
CA2302829
230-2829
2302829
CA2302829
230-2829
2302829
Weight: 8 pounds 3 kg.
EXCAVATOR, WHEEL TRACTOR,
This part in 2 request:
Show.
This information for suppliers only!
2020-07-09
2016-08-30
Compatible equipment models: 2302829:
Number on catalog scheme:
10
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2269 Ridge Reamer 1 Start By:
Remove the cylinder head.
Remove the engine oil pan.Note: Connecting rods and bearings are marked with color codes. The color codes are blue, yellow, and unmarked. The bearings must match up with the corresponding connecting rods. It is possible to have different color codes in the same engine.
Rotate the crankshaft until the piston that is being removed is at the bottom center position.
Use Tooling (A) to remove the carbon ridge from the top inside surface of the cylinder bore.
Illustration 1 g02868736
Illustration 2 g06049423
The connecting rod and the connecting rod cap have matching numbers on the side. Note the location of the connecting rod for installation. If necessary, make a temporary mark on the connecting rod and the connecting rod cap to identify the cylinder number.
Remove bolts (1).
Remove connecting rod cap (2) from the connecting rod.Note: Use tape or rubber tubing on the connecting rod bolts to protect the crankshaft journals from damage.
Illustration 3 g02868862
Carefully push the piston and the connecting rod assembly (3) out of the cylinder bore. Lift the piston out of the top of the cylinder block.
Repeat Steps 1 through 6 to remove the remaining pistons and connecting rods.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2269 Ridge Reamer 1 Start By:
Remove the cylinder head.
Remove the engine oil pan.Note: Connecting rods and bearings are marked with color codes. The color codes are blue, yellow, and unmarked. The bearings must match up with the corresponding connecting rods. It is possible to have different color codes in the same engine.
Rotate the crankshaft until the piston that is being removed is at the bottom center position.
Use Tooling (A) to remove the carbon ridge from the top inside surface of the cylinder bore.
Illustration 1 g02868736
Illustration 2 g06049423
The connecting rod and the connecting rod cap have matching numbers on the side. Note the location of the connecting rod for installation. If necessary, make a temporary mark on the connecting rod and the connecting rod cap to identify the cylinder number.
Remove bolts (1).
Remove connecting rod cap (2) from the connecting rod.Note: Use tape or rubber tubing on the connecting rod bolts to protect the crankshaft journals from damage.
Illustration 3 g02868862
Carefully push the piston and the connecting rod assembly (3) out of the cylinder bore. Lift the piston out of the top of the cylinder block.
Repeat Steps 1 through 6 to remove the remaining pistons and connecting rods.
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
120M, 12M, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 235C, 236, 236B, 236B3, 236D, 2384C, 2390, 2391, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 2484C, 2491, 252B, 252B3, 256C, 257B, ...
120H, 120H ES, 120H NA, 120M 2, 135H, 135H NA, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 2864C, 287D, 289D, 299D, 299D XHP, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 30...
3116, 3126, 3208, 3306B, 3508, 3508C, 3512, 3512B, 3516, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 515, 525, 525B, 525C, 535B, 535C, 545, 545C, D379, D379B, D7G, ...
307C, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 32...
307C, 308D, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 315C, 315D L, 316E L, 318C, 318E L, 319D, 319D L, 320B, 320C, 32...
307C, 308C, 315C, 315D L, 319D L, 320B, 320C, 320C FM, 320C L, 320D, 320D L, 320D LRR, 320D RR, 320E LRR, 321D LCR, 322, 322 FM L, 322B, 322B L, 322C, 322C FM, 323D L, 324D FM, 325, 325 L, 325 LN, 325...
307C, 308C, 311D LRR, 311F LRR, 312C, 312C L, 314D CR, 314D LCR, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D FM, 320D LRR, 320D RR, 32...
318C, 320C, 321C, 322C, 325C, 325D L, 325D MH, 330C, 374D L, 374F L
583T, 587T, 621B, 621G, 621H, 621K, 623G, 623H, 623K, 627F, 627G, 627H, 627K, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651B, 657E, 657G, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773E, 773F, 773G,...
322B LN, 322C, 322C FM, 325 L, 325B L, 330B, 330B L, 365C, 365C L, 365C L MH, 374F L, 375, M325B
345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH
9D8040
HOSE AS
621B, 621R, 623B, 627B, 627F
621B, 621R, 623B, 627B, 627F
1666138
HOSE
621B, 627F
621B, 627F
3296873
HOSE AS
950H, 962H, IT62H
950H, 962H, IT62H
3296874
HOSE AS
950H, 962H, IT62H
950H, 962H, IT62H
3296875
HOSE AS
950H, 962H, IT62H
950H, 962H, IT62H
3296876
HOSE AS
950H, 962H, IT62H
950H, 962H, IT62H
2635934
HOSE AS
657G, 795F AC, 795F XQ, 990H
657G, 795F AC, 795F XQ, 990H
2607699
HOSE AS
657G
657G
1272260
HOSE AS
657G, CW-14, PS-150B, PS-150C, PS-200B
657G, CW-14, PS-150B, PS-150C, PS-200B
2551256
HOSE AS
651B, 834G, 836G, 988G
651B, 834G, 836G, 988G
2402015
HOSE AS
651B, 735, 740, 824C, 824G, 824G II, 825G II, 826G II, 834G, 836G, 988G
651B, 735, 740, 824C, 824G, 824G II, 825G II, 826G II, 834G, 836G, 988G
2906430
HOSE
651B
651B