2302869 HOSE-RADIATOR Caterpillar parts
324D, 324D L, 324D LN, 325D, 325D L, M325D L MH, M325D MH
Rating:
Alternative (cross code) number:
CA2302869
230-2869
2302869
CA2302869
230-2869
2302869
Weight: 2 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
This part in 2 request:
Show.
This information for suppliers only!
2019-01-29
2019-01-29
Compatible equipment models: 2302869:
Number on catalog scheme:
8
For full view, you need register
Information:
The ends of the bellows are very sharp. Injury could occur if the bellows are not handled properly. Handle the bellows by the convolutions.
Note: Refer to Special Instruction, REHS1728, "Application Guideline for the Bellows" for additional information on handling the bellows if the machine is equipped.
Remove both clamp assemblies (5) . Remove bellows (6) and position exhaust tube assemblies (4) and (7) aside. Discard clamp assemblies (5) and bellows (6) .
Illustration 3 g02346358
Place Mark (Y) at all four locations as shown. This action will aid in the installation of the lines group.
Remove clamp assemblies (8) and (10) , and remove lines group (9) .
Illustration 4 g02346359
Remove both clamp assemblies (12) . Remove bellows (13) and position tube assemblies (11) and (14) aside. Discard clamp assemblies (12) and bellows (13) .
Illustration 5 g02346362
Place Mark (Y) at all four locations as shown. This action will aid in the installation of the lines group.
Loosen clamp assemblies (15) and (17) and discard the clamp assemblies. Remove lines group (16) .
Illustration 6 g02346365
Note: Refer to Special Instruction, REHS1728, "Application Guideline for the Bellows" for additional information on handling the bellows if the machine is equipped.
Remove both clamp assemblies (19) . Remove bellows (20) and position elbow assemblies (18) and (21) aside. Discard clamp assemblies (19) and bellows (20) .
Illustration 7 g02346366
Disconnect tube assembly (22) .
Disconnect tube assemblies (23) and (24) and position the tube assemblies out of the way.
Illustration 8 g02346367
Attach a suitable lifting device to turbocharger (25) . The weight of turbocharger (25) is approximately 27 kg (60 lb). Remove nuts (26) and remove the turbocharger. Discard nuts (26) .Installation Procedure
Note: Check all of the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
The alignment of the bellows is important. Improper alignment may lead to premature failure of the bellows. Misalignment can be identified by visually inspecting the convolutions for uniformity of compression.Inspect the bellows for damage prior to installation. If there is any damage to the convolutions, discard the bellows. Minor damage to the ends of the bellows may be repaired. However, if there is any difficulty in installation after the repair, discard the bellows.
Install turbocharger (25) in the reverse order.
Apply Tooling (A) to the threads of the studs and to the threads of new nuts (26) . Tighten the new nuts (26) to a torque of 70 5 N m (52 4 lb ft).
Illustration 9 g02346365
Position new bellows (20) , new clamp assemblies (19) , elbow assembly (18) , and elbow assembly (21) . Tighten clamp assemblies (19) to a torque of 8.5 1 N m (75 9 lb in).
Tighten new clamp assemblies (15) and (17) to a torque of 8.5 1 N m (75 9 lb in).
Illustration 10 g02346359
Position new bellows (13) , new clamp assemblies (12) , elbow assembly (11) , and elbow assembly (14) . Tighten clamp assemblies (12) to a torque of 35 2 N m (26 1 lb ft).
Tighten new clamp assemblies (8) and (10) to a
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 160H, 160H ES, 160H NA, 160K...
315B, 315B L, 315C, 315D L, 316E L, 317B LN, 318D L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 32...
311B, 315B, 315C, 315D L, 316E L, 318B, 318C, 318D2 L, 318E L, 320, 320 L, 320B, 320B FM LL, 320C, 320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320N, 321B, 321D LCR, 323D L, 323D LN, 323D SA, ...
307B, 307C, 308C, 311D LRR, 311F LRR, 312C L, 314C, 314D CR, 314D LCR, 315C, 315D L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D...
307C, 311C, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320 L, 320B, 320C, 320D, 320D FM, 320D GC, 320D L, 32...
307C, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 32...
307C, 308D, 311F LRR, 312D, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318C, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 3...
308C, 312C, 312C L, 312D, 314C, 315C, 315D L, 318D2 L, 319D L, 320 L, 320B, 320C, 320D, 320D L, 320D LRR, 320D2 L, 320E, 320E L, 320E LN, 321D LCR, 322B, 322B L, 322B LN, 322C FM, 323E L, 324D, 324D F...
311C, 311D LRR, 311F LRR, 312C, 312D, 312D L, 315C, 315D L, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 320B, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2 L, 321C, 321D LCR, 322, 322 FM L, 322 LN, 322B...
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, M325D L MH, M325D MH
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, M325D L MH, M325D MH
324D, 324D L, 324D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D2 L, 365B
2746343
HOSE AS
324D, 325D, 325D L, 329D L
324D, 325D, 325D L, 329D L
1417677
HOSE AS
324D, 325D, 325D L, 329D L
324D, 325D, 325D L, 329D L
2597239
HOSE AS
320D LN, 323D L, 323D LN
320D LN, 323D L, 323D LN
2597238
HOSE AS
323D L, 323D LN
323D L, 323D LN
2844545
HOSE AS
323D L, 323D LN
323D L, 323D LN
323D L, 325B L, 325C, 325D, 325D L, 330, 330B, 330B L, 349E, 349E L, 349E L VG, 349F L, 385B, 385C L, W330B
3077976
HOSE AS
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, M325D L MH, M325D MH
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, M325D L MH, M325D MH
3077975
HOSE AS
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, M325D L MH, M325D MH
324D, 324D L, 324D LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, M325D L MH, M325D MH
2561665
HOSE AS
324D, 324D L, 324D LN, 325D, 325D L, 329D, M325D L MH, M325D MH
324D, 324D L, 324D LN, 325D, 325D L, 329D, M325D L MH, M325D MH
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, M325D L MH, M325D MH
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L