HOSE AS-9.5 ID 2306412 - Caterpillar

Installation Procedure
1. Weld block (1) in position on the right rear corner of the platform. Illustrations 1 and 2 shown the location of block (1).
Illustration 1. Location of new components to support lower muffler exhaust pipe. (View from right side of truck.)
Illustration 2. Weld dimensions and location of new components to support lower muffler exhaust pipe. (View from above truck.)2. Fasten bracket assembly (2) to block (1) with bolts (8) and washers (4).3. Put clamp (6) in position of the lower exhaust pipe. Fasten clamp (6) to bracket (1) with bolts (3), two washers (4), and two nuts (5).4. Fasten clamp (6) to the exhaust pipe with bolt (7) and nut (5).