HOSE AS 2338345 - Caterpillar

Illustration 48 g00564270
Install auxiliary drive coupling (16) on shaft (17) .
Illustration 49 g00565155
Illustration 50 g00564268
Align the blind hole in pump cover (15) with alignment pin (23) . Install the pump cover in end cap (5) .
Illustration 51 g00564267
Install retainer (14) on end cap (5) .
Illustration 52 g00564266
Install six bolts (13) in retainer (14) . Tighten bolts (13) to a torque of 13 N m (115 lb in).
Illustration 53 g00564265
Illustration 54 g00564264
Illustration 55 g00564263
Install relief valve adjustment plug (11) in end cap (5) . Use a flat head screwdriver in order to install relief valve adjustment plug (11) . The marks on end cap (5) , locknut (12) and the relief valve adjustment plug must line up. Tighten the relief valve adjustment plug to the torque of 52 N m (38.0 lb ft).
Illustration 56 g00564261
Illustration 57 g00564259
Illustration 58 g00564258
Lubricate O-ring (10) and auxiliary mounting pad (9) . Install O-ring (10) and auxiliary mounting pad (9) . Tighten to a torque of 259 N m (189.0 lb ft).
Illustration 59 g00564256
Install multifunction valves (6) and (7) in end cap (5) . Tighten to a torque of 86 N m (66.0 lb ft).
Illustration 60 g00565160
Illustration 61 g00564253
Install gasket (3) on housing (4) . Line up pin (64) on hydraulic displacement control valve (2) with the hole in link (65) . Install hydraulic displacement control valve (2) on housing (4) .
Illustration 62 g00564192
Install six screws (1) in hydraulic displacement control valve (2) . Tighten to a torque of 16 N m (140 lb in).Note: Rotate the pump shaft with a torque wrench. The torque should be between 7 14 N m (60 125 lb in) in order to rotate the pump shaft.End By: Install the steering pump. Refer to Disassembly and Assembly, "Steering Pump - Install" for the machine that is being serviced.