HOSE 2374090 - Caterpillar

Illustration 1 g00289743
(2) (4) Torque for nuts ... 30 7 N m (22 5 lb ft) (3) Distance between the control lever (1), that is in the HOLD position, and the cab floor without a floormat ... 365 mm (14.4 inch) (5) (7) Torque for nuts ... 8 5 N m (6 4 lb ft) (6) (9) Torque for nuts ... 25 7 N m (18 5 lb ft) (10) Cable length in the HOLD position ... 197 mm (7.8 inch)Position actuating lever (8) in the HOLD position. Adjust the rod end in order to get the distance (10). Tighten the locknuts. Make adjustments at location (2), (4), and (5) in order to get a distance (3) between lever (1) and the floor of the cab. Tighten all respective locknuts. Make sure that it is possible to position lever (1) and actuating lever (8) in each of the four positions. (11) CLOSE position (12) FLOAT position (13) HOLD position (14) OPEN position