HOSE-BULK 2388336 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all hose assemblies and on all wire harnesses for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01189629
Turn valve (1) to the OFF position.
Illustration 2 g01189630
Use Tooling (A) in order to remove filter (6) .
Disconnect hose assembly (2) .
Disconnect hose assembly (4) .
Disconnect harness assembly (5) .
Remove fuel filter base (3) .