HOSE 2395660 - Caterpillar

Disassemble Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-7738 Cross Bar 1
3H-0465 Plates 4
4C-5662 Adapters 2
8B-7550 Coupler Rods 2
259-9239 Threaded Rod 1
B 439-3939 Lifting Link 2
C 154-6184 Forcing Bolts 2
D 439-3940 Lifting Link 2
E 3E-3880 Eye Bolt 1
F 1H-3107 Push-Puller Tool Gp 1
1H-3108 Coupler Rods 2
3H-0468 Plates 4
1H-3110 Bearing Puller 1
6V-3160 Cylinder Ram 1
1U-5230 Hydraulic Pump 1
M 513–8006 Pump Wrench 1 Start By:
Remove transfer gear box.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Illustration 1 g03160659
Illustration 2 g03110177
Remove tube assemblies (1).
Illustration 3 g03110388
Attach Tooling (A) and a suitable lifting device to input mounting flange (2). Remove input mounting flange (2).The weight of input mounting flange (2) with Tooling (A) is approximately 50kg (110 lb.).
Illustration 4 g03110699
Remove sleeve (3). Remove tube assembly (4).
Illustration 5 g03160477
Remove coupler (5). Remove tube assembly (6). Remove oil filter assembly (7).