AVSPARE.COM
parts catalog

HOSE AS 2444495 - Caterpillar


2444495 HOSE AS Caterpillar parts D9T
Rating:
21
Alternative (cross code) number:
CA2444495
244-4495
2444495
Caterpillar 2444495 HOSE AS

Buy HOSE AS 2444495 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 2444495:

TRACK-TYPE TRACTOR  D9T   Caterpillar
  For full view, you need register

Information:

1. Remove the guard for the air tank. Weight of guard is 180 lb. (82 kg). 2. Disconnect the two air lines (1) from valve. Install a plug in one elbow, and a nipple in the other elbow. 3. Remove the bolts (2) from drive shaft. Remove the rear drive shaft (3). 4. Remove the eight bolts (4) and nuts that hold the front and rear supports for the rear axle housing to the frame.5. Install blocks under the front of front tires. Connect air line (5) to valve. 6. Put transmission jack (A) into position under axle housing. Fasten the jack to the carrier assembly.7. Raise the rear of machine until there is enough clearance to remove axle housing. 8. Install stands (B) under the machine in front of rear axle housing.9. Remove the rear axle housing from under the machine. Put blocks under the front and rear of the tires.10. Remove the oil from both final drive compartments. Remove cover (6) from each side.11. Slide both axles about 12 in. (30 cm) out of the axle housing.12. Disconnect the air line from valve on axle housing.13. Remove the jack (A), and turn the axle housing until carrier assembly is up as shown. 14. Fasten a hoist and remove the front support (7). Weight of front support is 75 lb. (34 kg). 15. Remove the bolts (8) that hold carrier housing to axle housing.16. Install two 3/8"-16NC forged eyebolts in the housing, and fasten a hoist. 17. Use two 3/8"-16NC forcing screws (9) to make the carrier housing separate from axle housing. Remove the differential and carrier assembly from rear axle housing. Weight of assembly is 350 lb. (159 kg).Install Rear Differential And Carrier Assembly
1. Fasten a hoist and put the differential and carrier assembly into position in rear axle housing. 2. Install the bolts (1). Tighten the bolts to 195 18 lb.ft. (27,0 2,5 mkg).3. Fasten a hoist and put front support (2) into position. 4. Slide the axles (3) into position in the axle housing. Install the two covers. 5. Turn the axle housing into correct position for installation on machine. Put jack (A) under axle housing, and fasten it to carrier housing.6. Connect the air line (4) to the valve.7. Remove the blocks from under the tires. Push the rear axle housing into position under the machine. 8. Raise the rear of the machine and remove stands (B). Lower the machine down onto the axle housing.9. Install the bolts and nuts that fasten the supports to the frame. Tighten the bolts to 345 30 lb.ft. (47,7 1,4 mkg).10. Remove transmission jack (A).11. Disconnect the shop air line (4) from valve. Remove the nipple and plug from the elbows. 12. Connect the two air lines (5) to valve. 13. Install the rear drive shaft and bolts. Tighten bolts (6) to 98 10 lb.ft. (13,6 1,4 mkg). 14. Install the guard (7) for the air tank.15. Fill the axle housing

Caterpillar parts catalog:

Caterpillar parts catalog
D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED BY C18 Engine


Parts hose Caterpillar catalog:

5P0742 HOSE (210 CM) ORDER BY THE CM
120G, 215, 215B, 215D, 225, 229, 229D, 235, 235C, 235D, 245, 245B, 307, 307B, 312, 312B L, 312C, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 320 L, 3208, 320B, 322, 322 LN, 325, 330 FM L, 330 L, 3412...
5P1505 HOSE
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 216B, 216B3, 226B, 226B3, 232B, 2384C, 242B, 247B, 247B3, 2484C, 257B, 2864C, 307B, 311, 3116, 311B, 312, 3126, 312B, 3...
8C3681 HOSE
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H, 16H NA, 225D, 231D, 236D, 242D, 2...
5P0743 HOSE
120K, 120K 2, 120M, 12K, 12M, 140G, 140K, 140K 2, 140M, 160K, 160M, 16M, 216, 228, 236, 236B, 236D, 242B, 242D, 246D, 247, 247B, 248, 257D, 259D, 262D, 267, 267B, 268B, 272D, 272D XHP, 277D, 279D, 287...
1945171 HOSE
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3,...
2423360 HOSE
120K, 120K 2, 12K, 12M, 140G, 140K, 140K 2, 140M, 140M 2, 160K, 160M, 160M 2, 16M, 2290, 2390, 2391, 2491, 24M, 2590, 3126, 3126B, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL...
1139326 HOSE AS
5230, D9R, D9T
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.