HOSE AS 2445624 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 141-5831 Silicone Sealant -
Drain the engine oil into a suitable container. Refer to Operation and Maintenance Manual, "Engine Oil - Change".
Illustration 1 g03862692
Illustration 2 g03862587
Remove bolts (1) and plate (2). Remove plug (4).
Remove bolts (3), engine oil pan (5), and gasket (6). Discard the gasket. Installation Procedure
Install engine oil pan (5) in the reverse order of removal.
Apply Tooling (A) on the sealing surface of the engine oil pan and on the connecting joints of the front plate, oil pan gasket, cylinder block and the flywheel housing. Install a new gasket on the engine oil pan.
Illustration 3 g03862743
Tighten bolts (3) in numerical sequence to a torque of 40 5 N m (30 4 lb ft).
Illustration 4 g03862749
Tighten bolts (3) again in numerical sequence to a torque of 47 5 N m (35 4 lb ft).
Tighten plug (4) to a torque of 90 15 N m (66 11 lb ft).
Tighten bolts (2) 95 15 N m (70.06820 11 lb ft).