HOSE 2463470 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-8760     Chain Wrench     1    Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses, and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Open the engine hood.
Illustration 1 g00842328
Drain water separator bowl (1) into a suitable container.
Turn lock ring (2) counterclockwise in order to remove water separator bowl (1) .
Illustration 2 g00843344
Use Tooling (A) in order to remove primary fuel filter element (3) .
Illustration 3 g00843348
Disconnect four hose assemblies (4) .
Illustration 4 g00843349
Disconnect hose assembly (7) .
Remove two mounting bolts (6) and the washers.
Carefully remove unit injector hydraulic pump (5) .