HOSE AS 2501131 - Caterpillar

Illustration 1 g06216098
Table 1
Item Qty Part Specification Description
1 1 5H-3701 Purge Screw Torque to 11 4 N m (97 35 lb in).
2 1 9M-5892 O-Ring Seal Lubricate the O-ring seal lightly with lubricant that is being sealed.
3 1 115-5658 Seal Lubricate the seal lightly with lubricant that is being sealed.
4 Thickness of five new plates and four new friction discs is 60.90 1.02 mm (2.398 0.040 inch).
5 9U-1739 Outer Plate Thickness of one new plate is 7.30 0.10 mm (0.287 0.004 inch).
4 493-3796 Friction Disc Thickness of one new friction disc is 6.10 0.13 mm (0.240 0.005 inch).
Before assembly, dip the discs in lubricant to be used in the final drive.
5 6 8V-3609 Retractor Spring Length under test force is 86.4 mm (3.40 inch).
Test force is 715 N (161 lb).
Free length after test is 107.7 mm (4.24 inch).
6 6 3K-0360 O-Ring Seal Lubricate the O-ring seal lightly with lubricant that is being sealed.
7 2 9S-4185 Plug Torque to 70 to 77 N m (52 to 57 lb ft).
8 1 5M-6200 O-Ring Seal Lubricate the O-ring seal lightly with lubricant that is being sealed.
9 1 9U-1742 O-Ring Seal Lubricate the O-ring seal lightly with lubricant that is being sealed.
10 6 6M-9155 Pin Diameter is 4.78 0.25 mm (0.188 0.010 inch).
11 1 133-0992 Thrust Washer Before assembly, clean contact surfaces of 245-1093 Brake Anchor (14) and 133-0992 Thrust Washer (11) with Solvo Clean 68-0 and dry the surfaces.
Before assembly, apply green Loctite 620 to the either the brake anchor (14) or thrust washer (11) mating surfaces.
Tighten 8C-7562 Flat Head Screw (12) to 28 7 N m (248 62 lb in) and remove excess compound from the joint.
13 4 9S-8005 Plug Torque to 70 to 77 N m (52 to 57 lb ft).