HOSE AS. 2501146 - Caterpillar

Table 1
New Parts List    
Item     Quantity     Part Number     Description    
1     1     193-0955     Hinge As    
Illustration 1 g03869842
Rework Procedure
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Personal injury can result from flame cutting or welding on painted areas.The effect of gasses from burned paint is a hazard to the person doing the cutting or welding.Do not flame cut or weld on painted areas.
Before carrying out arc welding on the machine or on any equipment attached to the machine, disconnect all power and ground leads from the batteries in order to avoid possible damage to electronic components.
Illustration 2 g03872591
(A) 45.0 1.5 mm (1.77 0.06 inch) (B) 100.0 1.5 mm (3.94 0.06 inch)
Remove old hinge.
Locate hinge (1) as per dimension shown in Illustration 2.Note: Dimension of hinge location is common for all part numbers listed above.
Illustration 3 g03872648
(W1) 5.0 mm (0.20 inch) plug weld.
Use a plug weld (W1) in the four slots in the new hinge (1), as shown in Illustration 3. Grind smooth after welding.