HOSE 2516775 - Caterpillar

You must read and understand the warnings and instructions contained in the Safety section of this manual before performing any operation or maintenance procedures.Oil Level Gauge (Dipstick) Calibration
Check Calibration At First Oil Change
Engine oil level will vary depending on angle and slant of the engine installation (angle = front to back tilt, slant = sideways tilt).The engine will be equipped with either the Traditional or the Full Range oil level gauge. It is a good idea to verify that the oil level gauge markings are correct. The most convenient time to verify the markings is when the oil is changed, preferably at the first oil change.To verify the ADD mark and to establish the actual FULL mark on the oil level gauge, use the following procedure.3306C Engine
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.
The vehicle must be parked on a level surface to perform this maintenance procedure.
1. Operate the engine until normal operating temperature is achieved.