2608316 HOSE AS Caterpillar parts
315D L, 318D L, 318D2 L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L
Rating:
Alternative (cross code) number:
CA2608316
260-8316
2608316
CA2608316
260-8316
2608316
Weight: 6 pounds 2 kg.
EXCAVATOR,
Compatible equipment models: 2608316:
Number on catalog scheme:
2
For full view, you need register
Information:
Illustration 9 g03414066
Typical example of the P1 pin location for the sensor supply (30) Ground (56) 8 VDC supply (64) Ground (72) 5 VDC supply
Illustration 10 g03130497
Typical example of the pin locations for the 5 VDC supply on the P2 connector (1) 5 VDC supply (10) Ground
Table 2
Troubleshooting Test Steps Values Results
1. Check for Connector Damage
A. Turn the keyswitch to the OFF position.
B. Check the connectors and the harness for the following faults:
Damage
Abrasion
Corrosion
Incorrect attachment
C. Refer to Troubleshooting, "Electrical Connectors - Inspect".
D. Perform a
45 N (10 lb) pull test on each of the wires in the harness that are associated with the throttle position sensors. Check the wire connectors for all the sensors on the sensor supply circuits.
E. Check the screws for the ECM connectors for the correct torque of
6 N m (53 lb in).
Connector fault
Result: Found damage, abrasion, corrosion, or incorrect attachment.
Repair the connectors or the harness and/or replace the connectors or the harness.
Use the electronic service tool in order to clear all logged diagnostic codes and then verify that the repair eliminates the fault.
Result: No faults found
Proceed to Test Step 2.
2. Check for Active Diagnostic Codes
A. Connect the electronic service tool to the diagnostic connector.
B. Turn the keyswitch to the ON position.
C. Use the electronic service tool in order to monitor the diagnostic codes. Check and record any active diagnostic codes.
Note: Wait at least 15 seconds in order for the diagnostic codes to become active.
Diagnostic codes
Result: One or more of the diagnostic codes listed in Table 1 is active or recently logged.
Proceed to Test Step 3.
Result: None of the previous diagnostic codes are active.
The fault may be intermittent. Proceed to Test Step 7.
3. Disconnect the Sensors One at a Time
A. Turn the keyswitch to the OFF position.
B. For a 3509-X diagnostic code, disconnect the sensors on the 5 VDC supply circuit on the J2/P2 connector one at a time. Refer to Illustration 2. Wait for 30 seconds after each sensor is disconnected. Use the electronic service tool in order to monitor the diagnostic codes.
For a 3510-X diagnostic code, disconnect the analog throttle position sensors (if equipped) one at a time. Also, disconnect the aftertreatment ID module any other sensors that are connected to the 5 VDC supply on the P1 connector. Wait for 30 seconds after each sensor is disconnected. Use the electronic service tool in order to monitor the diagnostic codes.
For a 678-X diagnostic code, disconnect the digital throttle position sensors (if equipped) one at a time. Also, disconnect any other sensors that are connected to the 8 VDC supply on the P1 connector. Wait for 30 seconds after each sensor is disconnected. Use the electronic service tool in order to monitor the diagnostic codes.
Note: The sensor supply diagnostic will become inactive when the sensor that caused the diagnostic code is disconnected.
C. Ensure that all the sensors on the suspect sensor supply circuit are disconnected.
Diagnostic code inactive
Result: The 3509 or 3510 is inactive when
Cat SIS web machinery list:
Parts hose Caterpillar catalog:
320C, 320C FM, 320C L, 320D
320C, 320C FM, 320C L, 320D
320C, 320C FM, 320C L, 320D, 323D L, 323D LN
320C, 320C FM, 320C L, 320D
320C, 320C FM, 320C L, 320D, 323D L, 323D LN
320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 325C, 330B L, 330C L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 350
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
315D L, 316E L, 318D2 L, 318E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336...
2825884
HOSE AS
315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 323D LN, 323D SA
315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 323D LN, 323D SA
2536694
HOSE AS
312D, 312D L, 312D2, 312D2 GC, 313D2, 314D CR, 314D LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E LN, 323D L, 323D L...
312D, 312D L, 312D2, 312D2 GC, 313D2, 314D CR, 314D LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E LN, 323D L, 323D L...
2771089
HOSE AS
315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 322B L, 322C, 322C FM, 324D, 324D L, 324E, 324E L, 324E LN, 325C, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 322B L, 322C, 322C FM, 324D, 324D L, 324E, 324E L, 324E LN, 325C, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
2125326
HOSE AS
312D, 312D L, 314D CR, 314D LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 345B II, 345B L, 345C, 345C L, 345D, 345D...
312D, 312D L, 314D CR, 314D LCR, 315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 345B II, 345B L, 345C, 345C L, 345D, 345D...
1737864
HOSE AS
315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320C, 321C, 322B LN, 322C, 325C
315D L, 316E L, 318D2 L, 318E L, 319D, 319D L, 319D LN, 320C, 321C, 322B LN, 322C, 325C
3514998
HOSE AS
315D L, 316E L, 318E L
315D L, 316E L, 318E L
3689376
HOSE AS
315D L, 318D L, 318D2 L
315D L, 318D L, 318D2 L
2967057
HOSE AS
315D L, 316E L, 318E L
315D L, 316E L, 318E L
2786495
HOSE AS
315D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L
315D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L
2125149
HOSE AS
315D L, 316E L, 318E L, 319D, 319D L, 319D LN, 320E LRR, 320E RR, 322C, 322C FM, 325C FM, 330C L, 330C MH, 336E L, 336E LN, 336F L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 374F L
315D L, 316E L, 318E L, 319D, 319D L, 319D LN, 320E LRR, 320E RR, 322C, 322C FM, 325C FM, 330C L, 330C MH, 336E L, 336E LN, 336F L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 374F L
2661210
HOSE AS
315D L, 318D L, 318D2 L, 318E L
315D L, 318D L, 318D2 L, 318E L