HOSE AS 2699595 - Caterpillar

Parking Brake (5) - The alert indicator will light when the parking brake is engaged. The alert indicator should come on during start-up. The alert indicator should go out when the parking brake is released. If the brake is not set, an alarm will sound and the alert indicator will flash when the ignition switch is turned to the Off position. Turn the ignition switch to the On position before you release the brake.
Directional Turn Signals (6) and (12) - The indicators will flash when the turn signal lever is operated.
Hydraulic Oil Pressure (7) - The light will come on and an alarm will sound if the hydraulic pressure drops below 1800 175 kPa (261 25 psi). If this alert comes on stop the machine immediately. Select neutral and apply the parking brake. Investigate the cause. Do not operate the machine until the fault has been corrected.
High Beams (8) - The alert indicator will light when the control for the high beams is activated.
Action Indicator (9) - If this alert indicator lights, another alert indicator may be lighted. Take the appropriate action. Refer to "Alert Levels" below.
Continuous Flow (10) - The alert indicator will illuminate if continuous auxiliary hydraulic flow is enabled.
Hydraulic Filter Bypass (11) - The alert indicator will light when the hydraulic oil bypasses the hydraulic oil filters. If this alert indicator comes on, move the machine to a convenient location. Investigate the cause.Note: In extreme cold situations, the indicator may come on until the hydraulic oil warms up.
Differential Lock (13) - This indicator indicates that the differential locks have been disabled.
Creeper (14) (if equipped) - The alert indicator will light when the creeper control is active.
FORWARD (15) - The alert indicator will light when the direction control switch is in the FORWARD position.
NEUTRAL (16) - The alert indicator will light when the direction control switch is in the NEUTRAL position.
REVERSE (17) - The alert indicator will light when the direction control switch is in the REVERSE position.Digital Display
Illustration 2 g01363416Fuel Level (18) - The red range indicates low fuel. The fuel gauge will flash.Transmission Speed (19) - This indicates the speed selection on the transmission. "1" or "2" will appear on the screen. If the "Speeder" option is installed, "1", "2", or "H" will appear on the screen.Hydraulic Oil Temperature (20) - The red range indicates that the oil temperature is high.Service Hour Meter (21) - When the machine is in neutral, this will display service hours. When the machine is moving, the display shows total travel distance in the units that is selected.Engine Coolant Temperature (22) - The red range indicates that the coolant temperature is high. The temperature gauge will flash.Machine Travel Speed (23) - The display shows the speed in the units that is selected.Alert Levels
Level 1
Alert indicator (9) will light. No immediate action is required. The system may require attention soon.Level 2
Illustration 3 g01363417Alert indicator (9) will flash. Change the machine operation. Maintenance may be required by the system. The alert