HOSE AS 2763729 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Reports have been received that the washer fluid reservoir cover may crack on the machines listed above.Solution
Illustration 1 g06310548
(A) 491-7342 Cover
Illustration 2 g06310549
Cracked cover
Illustration 3 g06311436
(B) 339-6745 Bracket As
(C) Measurement LocationIn the event of failure, measure the 339-6745 Bracket As (B) at where the cover (A) mounts.The measured dimension (C) should be from 349.0 to 355.0 mm (13.74 to 13.98 inch). Replace the 339-6745 Bracket As, if the measured dimension is outside of this range.Note: When replacing the cover, order one piece of the ground level engine shutdown 360-1858 Film.