AVSPARE.COM
parts catalog

HOSE-SANDBLAST 2809707 - Caterpillar



2809707 HOSE-SANDBLAST Caterpillar parts HOSE
Rating:
16
Alternative (cross code) number:
CA2809707
280-9707
2809707
Caterpillar 2809707 HOSE-SANDBLAST

Buy HOSE-SANDBLAST 2809707 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


ACTION REQUIRED
Remove the 8T-5878 Bolt and 267-6787 Spacer and replace with new 447-1725 Bolts and new 267-6787 Spacers. Refer to the attached Rework Procedure.
If thread/dowel hole is damaged, please work with your dealer technical communicator for further rework assistance.
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification:
US
Canada
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 8.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
EXAMPLE COPY OF OWNER NOTIFICATION
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING DRIVE GROUP BOLTS
MODELS INVOLVED - CERTAIN 374D EXCAVATORS
Dear Cat Product Owner:
The swing drive group mounting bolts need to be replaced on the products listed below. The existing 8T-5878 Bolt may be loosened and may cause damage to the swing drive, swing bearing, and upper frame. You will not be charged for the service performed.
Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 12Mar2014 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 12Mar2014 Service Letter
Rework Procedure
1. Remove the bottom guard below the main valve. Move the drain hoses from swing bay area in order to avoid interference with the tooling.
2. Remove and replace the 8T-5878 Bolts one at a time in an alternating sequence. Refer to Image1.1.1 for the sequence.
Refer to Image1.1.2 for the required tooling. For the bolt removal a 3/4" impact with swivel and 36mm socket is required.
3. When replacing the bolts, apply a general-purpose adhesive/sealant for locking and sealing the screws and nuts in place (Loctite 242 or 243) to the bolts, before installing. Do NOT clean out the threads before installing.
4. Tighten each bolt to a specified torque of 900 +/- 100 N.m (665 +/- 75 lb ft).
Refer to Image 1.1.3 for the required tooling.
For installation, a 132-8112 Hydraulic Wrench, if available, or the updated serviceable 384-8910 Hydraulic Wrench. An equivalent hydraulic wrench with a 3/4" Sq Drive, with a torque range of 140 - 1400 ft/lbs and similar size and dimensions for access.
Image1.1.1
Image1.1.2
Image1.1.3


Parts hose Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.