HOSE 2810193 - Caterpillar

A. Hydraulic Schematics Eight Bank Valve System
B. Propel System Hydraulic Schematic
Specifications
A. Summary Of Features
1. Paves variable widths from 2743 mm/9' to 3658 mm/12'. With use of optional cut-off plates, paving widths are infinitely variable between 915 mm/3' and 3658 mm/12'.2. Patented variable-speed hydraulic augers extend with wings to ensure proper distribution of asphalt material.3. Electric paving depth adjustment.4. Full float vibratory screed with dual propane heaters.5. Bearing-mounted push rollers.6. 26 kW/35 hp Deutz air-cooled diesel engine.7. Self-cleaning all-steel track with separate hydrostatic drive to each track.8. Self-dumping hydraulic hopper with 6-ton capacity.9. Dual operating positions and elevated operator's platform offer excellent operator visibility and mobility from side to side.10. Full handrail around engine.11. Electric wash-down system.B. Diesel Engine
1. Flywheel power at 3000 RPM = 26 kW/35 hp Deutz F2L511 Air-Cooled Diesel Engine. a. Gross horsepower based on DIN6270 standard conditions 20°C/68°F and engine equipped with fuel, lube oil and cooling fan. No derating required up to 305 m/1,000 ft. altitude.2. 4 stroke-cycle diesel engine with 2 cylinders, 100 mm/3.94" bore, 105 mm/4.13" stroke and 1.625 liters/100 cu in displacement.3. Air cleaner, oil bath.4. 12 volt electric starting system with 33 amp alternator.C. Drive System
1. Dual independent direct drive hydrostatic motors driving all-steel, self-cleaning tracks. Cross reliefs in the drive system minimize possible damage due to overloading when the supply truck's brakes are applied or excessively soft material is encountered.2. Forward Speed Range: 0-54 mpm/170 fpm3. Track Dimensions: a. Length on ground = 760 mm/30"b. Width = 381 mm/15"c. Outside to outside = 2440 mm/96"D. Steering
1. Independently driven hydrostatic tracks allow skid steer performance from either of two operator locations.E. Hydraulic Oil Filtration
1. 10 micron hydraulic system filtration for long component life.F. Operator's Station
1. Dual operator's station allows paver control from either of two stations. Elevated operator's platform offers excellent operator visibility and mobility from side to side.G. Operator's Controls
1. Engine throttle, vibratory on/off, left auger control, right auger control, auger speed, remote auger controls, propulsion/stop control, hopper bed control, left material control, right material control, screed lift control, left screed jack control switch, right screed jack control switch, screed motor lockout switch, remote screed jack control, left wing control, right wing control, remote wing control and wash down spray control.H. Instrumentation
1. Charge light, engine oil pressure light.I. Augers
1. Patented variable-speed augers extend and retract with the wings for a constant, positive supply of material, even on corners and grades.2. Augers dimensions: a. Length = 1070 mm/42"b. Diameter = 180 mm/7"c. Thick = 10 mm/.375"3. Auger speed - variable.J. Hopper
1. Hydraulic hopper with simple gravity feed offers virtually maintenance-free operation. Two hydraulic hopper doors operate independently of one another for excellent regulation of material flow.2. Hopper dimensions: a. Length = 1190 mm/47"b. Width = 2540 mm/90"c. Capacity = 5.4 metric/6 standard tonsK. Extendable Screed
1. Basic 2740 mm/9' screed is capable of paving widths up to 3660 mm/12'. With optional cut-off plates, paving width is infinitely variable between 915 mm/3' and 3660 mm/12'. Screed is of full floating design. Height