HOSE AS 2853243 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00341532
Five case drain filters are located under the access door in the cab platform.
Illustration 2 g00625480
Left Side of Compartment
(1) Case Drain Filter (Fixed Displacement)
(2) Case Drain Filter (Brake)
(3) Case Drain Filter (Steering)
Illustration 3 g00625481
Right Side of Compartment
(4) Case Drain Filter (Variable Displacement)
(5) Case Drain Filter (Fan)
Illustration 4 g00625483
One case drain filter is located behind the fan guard on the rear of the machine.
(6) Case Drain Filter (Fan Motor)
Stop the engine.
Use a strap type wrench to remove the filter. Dispose of the used filter properly.
Clean the filter mounting base. Make sure that all of the used gasket is removed from the filter mounting base.
Lubricate the gasket of the new filter with clean hydraulic oil.
Install the new filter by hand. When the gasket contacts the filter base, tighten the filter by an additional 3/4 turn.
Repeat the above steps for the remaining case drain filters. There are a total of six case drain filters.
Start the engine and run the engine at low idle. Operate the steering, the brakes, and the implements.
Stop the engine. Inspect the filters for leaks. Make any necessary repairs. Close all access doors.