HOSE AS 2875381 - Caterpillar

Illustration 1 g01363527
(1) Fuel line nuts Torque ... 40 7 N m (30 5 lb ft) (2) Lubricate the O-ring seal with diesel fuel.
Illustration 2 g01363537
(3) Tighten the retainers to the following torque. ... 48 7 N m (35 5 lb ft) (4) Tighten the nut to the following torque. ... 30 7 N m (22 5 lb ft) (5) Lubricate the seal with diesel fuel.
Illustration 3 g01363640
The clamps for the fuel line are installed at the values that follow. Position (A) ... 816 7 mm (32 0.28 inch) Position (B) ... 751.8 mm (29.6 inch) Position (C) ... 609 7 mm (24 0.28 inch) Position (D) ... 569 3 mm (22 0.12 inch) Position (E) ... 532.4 mm (21 inch) Position (F) ... 483 3 mm (19 0.12 inch) Position (G) ... 386 3 mm (15 0.12 inch) Position (H) ... 366 3 mm (14.4 0.12 inch) Position (I) ... 360 3 mm (14.2 0.12 inch) Position (J) ... 176 3 mm (7 0.12 inch) Position (K) ... 136 3 mm (5 0.12 inch) Position (L) ... 77 3 mm (3 0.12 inch)
Failure to properly replace or install a fuel injection line clamp may lead to fuel line failure. Fuel line failure may result in a fire hazard, which may cause personal injury or death. The fuel injection line clamps must be installed per these specifications.