HOSE AS 2898791 - Caterpillar

Illustration 1 g01057458
Top view of machine is shown with the location of the steering stop adjustment on the non-engine end frame.
Illustration 2 g06222364
Top view
(1) Weld nut
(2) Flange
(3) Left turn stop
(4) Nut
(5) Right turn stop
(A) Basic dimension
Install nut (4) on left turn stop (3). Install left turn stop (3) through flange (2) and screw the left turn stop into weld nut (1).
Adjust left turn stop (3) until you obtain dimension (A). Dimension (A) equals 33.5 mm (1.32 inch).Note: Dimension (A) is a basic dimension. This dimension may be adjusted to help the steering neutralizer valves actuate at the correct moment.
Repeat this procedure for right turn stop (5).