HOSE AS 2929966 - Caterpillar

Illustration 4 g01431393
(34) Breaker relief valve (37) Hydraulic tankBreaker relief valve (34) is located on the top of hydraulic tank (37).
Illustration 5 g01431394
(32) Steering pump (38) Pilot and braking pumpThe steering hydraulic system has a two section gear type pump. The two pump sections are: steering pump (32) and pilot and braking pump (38). The pumps use the hydraulic tank as a common reservoir.The pump is mounted on the torque converter updrive housing and is driven by a gear inside the updrive housing. Steering pump (32) supplies oil for the operation of the steering system to articulate the machine. Pilot and braking pump (38) also supplies pilot oil for the steering circuit and implement circuit. Pilot and braking pump (38) supplies oil for the parking brake circuit and the service brake circuit.
Illustration 6 g01431395
(35) Pilot oil pressure reducing valvePilot oil pressure reducing valve (35) is located on the left side of the rear frame.
Illustration 7 g01431396
(18) Selector and pressure control valve (26) Check valveSelector and pressure control valve (18) and check valve (26) are located on the left side of the rear frame.
Illustration 8 g01277046
(17) Implement and steering solenoid valveImplement and steering solenoid valve (17) is located on the left side of the rear frame.
Illustration 9 g01277047
(9) STICsteering pilot valve (behind cover)STIC steering pilot valve (9) is located behind the cover on the operator station door.
Illustration 10 g01277049
(7) Steering control valveSteering control valve (7) is located on the rear frame, behind the articulation hitch.
Illustration 11 g01277050
(22) Hydraulic oil coolerHydraulic oil cooler (22) is located at the rear of the machine.
Illustration 12 g01431397
(25) Steering neutralizer valve for a right turn (29) Steering neutralizer valve for a left turnSteering neutralizer valve (25) for a right turn and steering neutralizer valve (29) for a left turn are located below the upper articulation hitch.
Illustration 13 g01249815
(1) Steering cylinderSteering cylinders (1) and (2) (not shown) are located on either side of the articulation hitch.
Illustration 14 g01249812
(3) Steering cylinder crossover relief valveSteering cylinder crossover relief valves (3) and (4) (not shown) are located on the steering cylinders.
Illustration 15 g01277055
Typical example (13) Secondary steering pumpSecondary steering pump (13) is mounted on the front of the output transfer gear housing, above the centre drive shaft.
Illustration 16 g01277056
(12) Secondary steering diverter valveSecondary steering diverter valve (12) is located on the right side of the transmission.