HOSE 2971590 - Caterpillar

TARGET="_parent">Seat Belt - Inspect
Walk-Around Inspection
Every 50 Service Hours
Bulldozer Tilt Brace and Tilt Cylinders - Lubricate
Equalizer Bar End Pins - Lubricate
Lift Cylinder Yoke Bearings - Lubricate
Ripper Linkage and Cylinder Bearings - Lubricate
Track Pins - Inspect
Every 50 Service Hours or Weekly
Cab Filter (Recirculation) - Clean/Inspect/Replace
Initial 250 Service Hours (or at first oil change)
Power Train Oil Filters - Replace
Every 250 Service Hours
Belts - Inspect/Adjust/Replace
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Equalizer Bar End Pins Oil Level - Check
Final Drive Oil Level - Check
Track - Check/Adjust
Winch Fairlead Rollers - Lubricate
Winch Oil Level - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Electronic Unit Injector - Inspect/Adjust
Engine Valve Lash - Check/Adjust
Engine Valve Rotators - Inspect
Every 500 Service Hours
Engine Crankcase Breather - Clean
Final Drive Oil Sample - Obtain
Final Drive Seal Guard - Inspect/Clean
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Cap Filter and Strainer - Replace/Clean
Hoses and Clamps - Inspect/Replace
Hydraulic System Oil Filters - Replace
Hydraulic System Oil Sample - Obtain
Power Train Breather - Clean
Power Train Oil Filters - Replace
Power Train System Oil Sample - Obtain
Recoil Spring Compartment Oil Level - Check
Every 1000 Service Hours or 6 Months
Battery - Inspect
Power Train Oil - Change
Power Train System Screens - Clean
Rollover Protective Structure (ROPS) - Inspect
Every 2000 Service Hours or 1 Year
Engine Mounts and Equalizer Bar - Inspect
Final Drive Oil - Change
Final Drive Seal Guard Packing - Replace
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Pilot) - Replace
Ladder Hinge Oil - Change
Track Roller Frame - Inspect
Track Roller Frame Guides - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Engine Air Filter Primary and/or Secondary Element - Clean/Replace
Every 2 Years
Refrigerant Dryer - Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 4000 Service Hours
Electronic Unit Injector - Inspect/Adjust
Engine Mounts and Crankshaft Vibration Damper - Inspect
Engine Valve Lash - Check/Adjust
Engine Valve Rotators - Inspect
Every 6000 Service Hours
Fuel Lines - Replace
Every 6000 Service Hours or 3 Years
Bearing Block Seal - Replace
Cooling System Coolant Extender (ELC) - Add
Cooling System Water Temperature Regulator - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change