HOSE AS 2G4706 - Caterpillar

When you change the disc saw teeth or holders, always replace the used bolts with new bolts. Use extreme cleanliness and properly torque the bolts upon installation. Failure to ensure cleanliness and to properly torque the bolts may result in machine damage.
330-4903
Illustration 1 g02718300
(1) Torque for the 16 bolts ... 434 20 N m (320 15 lb ft)Note: Install teeth on the disc after the disc is installed on the head. (2) Torque for the ten bolts ... 407 20 N m (300 15 lb ft)350-5882 and 350-5489
Illustration 2 g02718259
(1) Torque for the 32 bolts ... 170 20 N m (125 15 lb ft)Apply thread lock to the threads.Coat head sleeves and nut sleeves with Loctite 660. (2) Torque for the ten bolts ... 480 20 N m (354 15 lb ft) (3) Torque for the 16 bolts ... 407 20 N m (300 15 lb ft)Note: Install teeth on the disc after the disc is installed on the head.351-0511
Illustration 3 g02718265
(1) Torque for the 16 bolts ... 135 20 N m (100 15 lb ft)Note: Install teeth on the disc after the disc is installed on the head. (2) Torque for the ten bolts ... 480 20 N m (354 15 lb ft)