AVSPARE.COM
parts catalog

HOSE 2H9260 - Caterpillar



2H9260 HOSE Caterpillar parts 141, 191, 41, 44 HOSE
Rating:
27
Alternative (cross code) number:
CA2H9260
2H-9260
2H9260
Caterpillar 2H9260 HOSE

Buy HOSE 2H9260 Caterpillar genuine, new aftermarket tractor parts with delivery
HYDRAULIC CONTROL,

Compatible equipment models: 2H9260:

HYDRAULIC CONTROL  141   191   41   44   Caterpillar
Number on catalog scheme: None
 
  For full view, you need register

Information:

2. Remove plug (1).
Remove all bolts (2) and (3) except for one on each side of the steering clutch. It is necessary to turn the sprocket or track to remove the bolts.
3. Remove bolts (2) that hold the steering clutch to the steering clutch hub. Remove bolts (3) through the opening in the steering clutch case where the plug was removed. 4. Install two 3/8"-16 NC bolts 4 in. long in the brake bands as shown. Fasten a hoist to the brake bands and remove the last two bolts that hold the steering clutch in position. Remove steering clutch (4) from the machine. The weight of the steering clutch is 113 kg (250 lb). The following steps are for the installation of the steering clutches.5. Fasten a hoist to the brake bands as shown.6. Put the steering clutch (4) in position between the steering clutch hub and the flange. Install two bolts to hold the clutch in position. Remove the hoist.7. Put 9M3710 Anti-Seize Compound on the threads of all the bolts. Install the bolts that hold the steering clutch in position. Tighten the bolts to a torque of 270 25 N m (200 20 lb.ft.). Install the plug in the steering clutch case.8. After the brake hydraulic control and actuating mechanism is installed, fill the bevel gear case and steering clutch case with oil to the correct level. See Lubrication and Maintenance Manual.End By:a. install brake hydraulic controls and actuating mechanisms
Perform Scheduled Oil Sampling on oil wetted compartments after performing service work to check for contaminants left in the system following repair. Contaminants put into the system may cause rapid wear and shortened component life.
Disassemble And Assemble Steering Clutches
Start By:a. remove steering clutches
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove brake bands (1). 2. Install two 5/8"-11 NC forged eyebolts in the drum. Fasten a hoist to the drum. Weight of the drum is 23 kg (50 lb). Remove drum (2). 3. Put tool (B) on tool (A). Fasten a hoist to the steering clutch. Weight of the steering clutch is 90 kg (200 lb). Put the steering clutch on tool (A). Install tooling (C) and the nut. Put pressure on the steering clutch with tool (A). Remove bolts (3) and locks (4).
Release the pressure on the steering clutch slowly. The plate is under spring tension.
4. Remove tool (C) and the nut. 5. Remove plate (5). 6. Remove the eight disc assemblies (6) and eight discs (7). Put identification on the discs and the disc assemblies during removal. This will prevent wear on the discs and the disc assemblies and prevent a mix at assembly.7. Remove drum (8) from the steering clutch. 8. Remove eight springs (9).9. Remove inner springs (10).10. Remove eight sleeves (11). The following steps are for the assembly of the steering clutches.11. Put tool (B) on tool (A). Put retainer (2) in position on the steering clutch stand.
Check all

Caterpillar parts catalog:

Caterpillar parts catalog
NO. 41 HYDRAULIC CONTROL 28C00001-00424
NO. 41 HYD. CONTROL FRONT MOUNTED 24C00001-UP
NO. 41 HYDRAULIC CONTROL 28C00001-00424
NO. 41 HYD. CONTROL FRONT MOUNTED 24C00001-UP
NO. 44 HYDRAULIC CONTROL 09W00001-UP
141, 143, 151 & 161 HYDRAULIC CONTROL 54G00001-UP
141, 143, 161, 181 & 191 HYD. CONTROLS 36F00001-00413
140 & 150 HYDRAULIC CONTROL 22J00001-UP
141, 143, 161, 181 & 191 HYD. CONTROLS 36F00001-00413
140 & 150 HYDRAULIC CONTROL 22J00001-UP


Parts hose Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.