HOSE AS 2V8571 - Caterpillar

Illustration 1 g01427768
Top view of engineNote: Apply 4C-5599 Anti-Seize Compound to the threads of the locknut and surface of the two hard washers before assembly. (1) Torque for the locknut ... 120 20 N m (90 15 lb ft)Note: Apply 4C-5599 Anti-Seize Compound to the threads of the five bolts and surface of the ten hard washers before assembly. (2) Torque for the five bolts ... 120 20 N m (90 15 lb ft) (3) Apply 4C-5599 Anti-Seize Compound to the threads of the bolt and the full nut of the 46 clamps.Use the following procedure in order to tighten the 46 clamps:
Tighten the bolts of the clamps to 25 6 N m (18 4 lb ft).
Lightly tap around the clamps.
Again tighten the bolts of the clamps to 25 6 N m (18 4 lb ft).Note: Install the 20 bellows assemblies with the direction of flow, as shown. (4) Allowable offset for the 20 bellows assemblies from the center of the casting's inner diameter ... 1.5 mm (0.06 inch)Use the following procedure in order to tighten the 80 bolts (5) :
Tighten the bolts to 55 5 N m (41 4 lb ft).
Again tighten the bolts to 55 5 N m (41 4 lb ft). (6) Apply 4C-5599 Anti-Seize Compound to the surface of the four hard washers. (7) Apply 4C-4030 Thread Lock Compound to threads of the eight bolts.