3148205 HOSE AS Caterpillar parts
320D, 320D L, 320D2, 320D2 L, 323D L, 323D2 L
Rating:
Alternative (cross code) number:
CA3148205
314-8205
3148205
CA3148205
314-8205
3148205
EXCAVATOR,
Compatible equipment models: 3148205:
Number on catalog scheme:
21
For full view, you need register
Information:
Towing With Inoperable Engine
Personal injury or death could result when towing a disabled machine incorrectly.Block the machine to prevent movement before releasing the brakes. The machine can roll free if it is not blocked.
Place the shift control lever in the N position.
Chock the wheels.
Hook up the towing machine. Refer to Operation and Maintenance Manual, "Towing the Machine" for the guidelines.
Check the steering and the service brake on the disabled machine. If the steering or braking needs assistance, use an auxiliary power unit (APU) as a separate hydraulic source. An APU that is designed to use with this machine is available through your Cat dealer. Consult your Cat dealer for further information on the selection and the proper operation of an APU. Only a limited amount of steering is provided by the secondary steering system. The steering system accumulators provide a limited amount of stored hydraulic pressure for secondary steering capability. The stored hydraulic pressure is exhausted by a small amount of steering system oil flow that keeps the oil warm and by steering wheel action by the operator. The stored hydraulic pressure will be exhausted faster as the steering wheel action by the operator is used to a greater magnitude, duration, or frequency. Refer to Operation and Maintenance Manual, "Operator Controls" for more information on the secondary steering system.Note: When the engine start switch is moved to the OFF position and the MASTER switch is moved to the OFFposition, then solenoid valves will fully deplete the brake oil pressure from the brake accumulators and the steering oil pressure from the steering accumulators.
Apply the service brake pedal on the disabled machine in order to check the braking. If the brakes are functioning, release the brakes.
The parking brake must be fully released. Partial brake engagement and brake damage could occur if proper hydraulic pressure is not maintained.Do not allow the parking brake release pressure to drop below 3445 kPa (500 psi) when the towed machine is moving.Do not allow the dry park brake release pressure to drop below 10342 kPa (1500 psi) when the towed machine is moving.
Illustration 1 g03441425
Turn the load brake button switch (2) counter clockwise. Push and hold the load brake button switch until the Advisor display indicates that the parking brake is released and the hydraulic brake pressure is 3800 kPa (550 psi). Dry park brakes are released and the hydraulic brake pressure is 10342 kPa (1500 PSI)
Turn the steering wheel. Confirm that the front wheels turn as the steering wheel is turned.
Remove the wheel chocks.
Move the shift control lever to the N position. Make sure that the engine start switch remains in the ON position.
Pull the disabled machine with the towing machine.
During towing, continue to monitor the hydraulic pressure on the Advisor display. Do not continue to tow the machine if the hydraulic brake pressure is below 3445 kPa (500 psi). Do not continue to tow the machine if the dry park brake pressure is below 10342 kPa (1500 PSI). As the parking brake release oil
Personal injury or death could result when towing a disabled machine incorrectly.Block the machine to prevent movement before releasing the brakes. The machine can roll free if it is not blocked.
Place the shift control lever in the N position.
Chock the wheels.
Hook up the towing machine. Refer to Operation and Maintenance Manual, "Towing the Machine" for the guidelines.
Check the steering and the service brake on the disabled machine. If the steering or braking needs assistance, use an auxiliary power unit (APU) as a separate hydraulic source. An APU that is designed to use with this machine is available through your Cat dealer. Consult your Cat dealer for further information on the selection and the proper operation of an APU. Only a limited amount of steering is provided by the secondary steering system. The steering system accumulators provide a limited amount of stored hydraulic pressure for secondary steering capability. The stored hydraulic pressure is exhausted by a small amount of steering system oil flow that keeps the oil warm and by steering wheel action by the operator. The stored hydraulic pressure will be exhausted faster as the steering wheel action by the operator is used to a greater magnitude, duration, or frequency. Refer to Operation and Maintenance Manual, "Operator Controls" for more information on the secondary steering system.Note: When the engine start switch is moved to the OFF position and the MASTER switch is moved to the OFFposition, then solenoid valves will fully deplete the brake oil pressure from the brake accumulators and the steering oil pressure from the steering accumulators.
Apply the service brake pedal on the disabled machine in order to check the braking. If the brakes are functioning, release the brakes.
The parking brake must be fully released. Partial brake engagement and brake damage could occur if proper hydraulic pressure is not maintained.Do not allow the parking brake release pressure to drop below 3445 kPa (500 psi) when the towed machine is moving.Do not allow the dry park brake release pressure to drop below 10342 kPa (1500 psi) when the towed machine is moving.
Illustration 1 g03441425
Turn the load brake button switch (2) counter clockwise. Push and hold the load brake button switch until the Advisor display indicates that the parking brake is released and the hydraulic brake pressure is 3800 kPa (550 psi). Dry park brakes are released and the hydraulic brake pressure is 10342 kPa (1500 PSI)
Turn the steering wheel. Confirm that the front wheels turn as the steering wheel is turned.
Remove the wheel chocks.
Move the shift control lever to the N position. Make sure that the engine start switch remains in the ON position.
Pull the disabled machine with the towing machine.
During towing, continue to monitor the hydraulic pressure on the Advisor display. Do not continue to tow the machine if the hydraulic brake pressure is below 3445 kPa (500 psi). Do not continue to tow the machine if the dry park brake pressure is below 10342 kPa (1500 PSI). As the parking brake release oil
Caterpillar parts catalog:
Parts hose Caterpillar catalog:
120B, 120G, 120H, 120H ES, 120H NA, 120M, 120M 2, 12G, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H NA, 140B, 140G, 140M, 140M 2, 140M 3, 140M 3 AWD, 14G, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 215, ...
307C, 308C, 311C, 311D LRR, 311F LRR, 312C, 312D, 312D L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320D FM RR, 320D L, 320D LN, 320D...
307C, 307D, 307E, 311C, 311D LRR, 311F LRR, 312D, 312D L, 314C, 314D LCR, 314E LCR, 320B, 320C, 320C FM, 320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322B, 322B LN...
308C, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314C, 315D L, 318D L, 318D2 L, 319D, 319D L, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D...
308C, 312C, 312C L, 312D, 314C, 315C, 315D L, 318D2 L, 319D L, 320 L, 320B, 320C, 320D, 320D L, 320D LRR, 320D2 L, 320E, 320E L, 320E LN, 321D LCR, 322B, 322B L, 322B LN, 322C FM, 323E L, 324D, 324D F...
314C, 314D CR, 314D LCR, 314E CR, 320B, 320C FM, 320D, 320D L, 323D L, 324E LN, 325B L, 325D FM, 325D FM LL, 328D LCR, 330B, 330B L, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D...
315D L, 316E L, 318D2 L, 318E L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336...
319D, 319D L, 319D LN, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 321D LCR, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D L, 324E, 325C FM, 330C FM
320C, 320C FM, 320C L, 320D, 323D L, 323D LN
320C, 320C FM, 320C L, 320D, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
4311802
HOSE AS
320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D2 L
320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 321D LCR, 323D L, 323D2 L
320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D2 L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 336D2
3558198
HOSE
320D, 320D FM, 320D GC, 323D L
320D, 320D FM, 320D GC, 323D L
3558164
HOSE AS
320D, 320D FM, 320D GC, 323D L
320D, 320D FM, 320D GC, 323D L
2980942
HOSE
320D
320D
3199845
HOSE AS
320D, 320D FM, 320D L, 320D2 L, 323D L
320D, 320D FM, 320D L, 320D2 L, 323D L
3148270
HOSE AS
320D LRR, 320D RR
320D LRR, 320D RR
3061300
HOSE AS
320D LRR, 320D RR, 321D LCR
320D LRR, 320D RR, 321D LCR
3061296
HOSE AS
320D LRR, 320D RR, 321D LCR
320D LRR, 320D RR, 321D LCR
1087373
HOSE AS
320D, 320D L
320D, 320D L
3543691
HOSE AS
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
3371426
HOSE AS
320D, 320D L, 320D2, 320D2 L, 323D L, 323D2 L
320D, 320D L, 320D2, 320D2 L, 323D L, 323D2 L