HOSE 3155496 - Caterpillar

Table 1
4: VIEW/PRINT REPORT        
5: CAL PAYLOAD        Then press the "3" key for the "3: ENTER CARRYBK WT" option.
Table 2
2: SET WEIGH RANGE        
3: ENTER CARRYBK WT        The system displays a series of 3 messages after initiating the "ENTER CARRYBK WT" option. These messages describe the function of the carryback weight:
Table 3
CARRYBK WT WILL        
BE SUBTRACTED        
Table 4
FROM EACH BUCKET        
       
Table 5
PRESS [OK] TO        
CONTINUE        The help messages display four times or the operator can stop the messages by pressing the "OK" key. A two line menu display appears after the help messages:
Table 6
0: ENTER CARRYBK WT        
1: EXIT NO CHANGE        Press the "0" key in order to proceed with the calibration. To exit this menu, press the "1" key. The operator can return to the calibration menu by pressing the "OK" key. If the operator chooses to proceed with the change, the system prompts the operator to enter a new carryback weight:
Table 7
ENTER CARRYBK WT        
X.X TON        In this case, the operator has entered a new carryback weight of .8 tons. To accept the new value, the operator must press the "OK" key.
Table 8
ENTER CARRYBK WT        
0.8 TON        The operator uses the standard method of entering data for the loader payload system to input the new carryback weight. The new carryback weight is subtracted from all future calculations of the weight of the bucket. Note: The value of the present carryback weight and the "date/time" of the last modification can be viewed on the message center. Refer to the Systems Operations, "Calibration" "Check Calibration Information" section of this manual for details about viewing data.