HOSE AS 3162919 - Caterpillar

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Safety
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
507-6700 Auxiliary Control Ar Revision -00
Item Part Number Description Media Number
1 330-2521 Front Lines Gp GEHS0182
2 372-3222 Main Control Valve Gp GEHS0694
3 381-0033 Joystick Control Gp GEHS0329
4 388-0310 Pilot Lines Gp GEHS0911
5 444-9174 Film -
6 451-8747 Pilot Lines Gp GEHS0698
7 480-4375 Cab Wiring Gp M0069740
8 484-6970 Pilot Lines Gp M0069210
9 494-9526 Pilot Lines Gp M0069226
10 494-9527 Pilot Lines Gp M0069222
11 499-2156 Chassis Wiring Gp M0069224
12 507-6699 Control Gp M0069218
Standard Removal
- 388-0309 Pilot Lines Gp -
- 389-8009 Pilot Lines Gp - Standard Removal
Illustration 2 g06054287
(A) 388-0309 Pilot Lines Gp
(B) 389-8009 Pilot Lines Gp
Remove hoses and fitting (A) and (B).Calibration
Set the machine tool control system.
Reference: Excavator Tool Control System, KENR9608, "Testing and Adjusting Section", "Process for setting Up the Work Tool"Calibrate the machine electronic control system.
Reference: Excavator Tool Control System, KENR9608, "Testing and Adjusting Section", "Work Tool Parameter - Program"Set tool flows and pressures.
Reference: Excavator Tool Control System, KENR9608, "Testing and Adjusting Section", "Process for Setting Up the Work Tool"Reference: Excavator Tool Control System, KENR9608, "Testing and Adjusting Section", "Work Tool - Select"Set the proper operating and/or relief pressures and the proper flows for the tool that is attached to the machine. Refer to the Operation and Maintenance Manual of the specific work tool installed.Principles of Operation
Reference: Excavator Tool Control System, KENR9608, "Systems Operation Section", "General Information"Serial Number Identification 444-9174 Film
Caterpillar Work Tools hydraulic kits are identified with serial numbers. The serial number is printed on a film group (1). This film group should be placed on the right-hand window inside the cab.
Illustration 3 g01742203
(1) 444-9174 Film
Illustration 4 g01743196