HOSE AS 3177282 - Caterpillar

Illustration 1 g01126436
(1) Diameter of roller rim ... 260 mm (10.20 inch) (2) Bearing depth ... 13.5 0.5 mm (0.55 0.02 inch) (3) Torque for 12 bolts ... 135 20 N m (100 15 lb ft) (4) Torque for bolts that hold the rollers to the roller support brackets ... 750 70 N m (550 50 lb ft)Note: Rubber toric seals must be clean and dry at assembly. All surfaces that contact the toric seals must be clean and dry at assembly. At assembly, apply a thin film of oil to the contacting surfaces of the metal seal. Seal rings must be assembled squarely with the bore. The toric ring must not bulge and the toric ring must not be twisted. (5) Protrusion of the plug from the stopper ... 0 to 5 mm (0 to 0.20 inch)Note: The plug must not be recessed below the surface of the stopper after the carrier roller is assembled. (6) Assembled depth of the stopper ... 11 4 mm (0.45 0.15 inch) (7) Torque for bolts that hold the roller support brackets to the frame assembly ... 1300 150 N m (960 110 lb ft)