HOSE AS 3197924 - Caterpillar

Connection Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 284-5122 Stand 2
8S-8048 Saddle 2
8S-7615 Pin 2
8S-7621 Tube 2
B 260-9412 Chain As 1
C 439-3941 Link Bracket 2
D 4C-5593 Anti-Seize Compound 1 Note: Machines which are equipped with differential steering MUST HAVE the opposite track on the ground to use this procedure.Note: Two people will be required for this procedure to ensure safety.
Illustration 1 g06291091
Install Tooling (C) onto the final drive. Install an additional Tooling (C) onto master link (2).
The length of chain must be the distance from the final drive to the master link, plus one revolution around the final drive.
Start the machine and turn the final drive in a reverse direction to pull the track together.
Illustration 2 g06291030
Connect master link (5) on idler (1).
Use Tooling (B) to install track shoe (4) in position on the master link (2). The weight of track shoe (4) is approximately 45 kg (100 lb). Put Tooling (D) on the threads, the body, and the washer face of the master link bolts. Install bolts (3). Tighten the bolts to a torque of 870 90 N m (650 50 lb ft). Tighten the bolts (3) 120 degrees more.
Illustration 3 g06291046
Remove Tooling (A) from the blade.
Adjust the track tension. Refer to Operation and Maintenance Manual, "Adjust Track Tension".