HOSE 3220965 - Caterpillar

Rotation is counterclockwise when seen from drive end.Type of pump ... pistonDisplacement of pump ... 38 cm3/rev (2.30 in3/rev)Pressure setting ... 13 800 kPa (2000 psi)Maximum case pressure ... 70 kPa (10 psi)For test use SAE 10 oil at 65°C (150°F) Test At Full SpeedOutput ... 96.5 liter/min (25.5 U.S. gpm) At a pressure of ... 690 kPa (100 psi)With pump at ... 2420 rpmWith engine at ... 2200 rpmOutput ... 94.6 liter/min (25 U.S. gpm) At a pressure of ... 6900 kPa (1000 psi)With pump at ... 2420 rpmWith engine at ... 2200 rpm Test At Half SpeedOutput ... 45.4 liter/min (12 U.S. gpm) At a pressure of ... 690 kPa (100 psi)With pump at ... 1210 rpmWith engine at ... 1100 rpmOutput ... 45.4 liter/min (12 U.S. gpm) At a pressure of ... 6900 kPa (1000 psi)With pump at ... 1210 rpmWith engine at ... 1100 rpm(1) Torque for stroke adjustment locknut ... 15 to 21 N m (12 to 16 lb ft)(2) Torque for compensator locknut ... 110 to 140 N m (16 to 20 lb ft)Main shaft (3) end play ... .076 to .381 mm (.003 to .015 in)(4) Torque for four end cap bolts ... 83 to 110 N m (62 to 80 lb ft)Torque for three trunnion bolts ... 10 to 12 N m (7 to 9 lb ft) If trunnion or end cap bearings are removed, replace all shims to the same location originally installed.Torque for four compensator screws ... 6.9 to 7.8 N m (61 to 69 lb in)