HOSE 3282916 - Caterpillar

Illustration 1 g03664639
Typical example
Table 1
Specification for 113-1154 Turbocharger Gp, 7E-6708 Turbocharger Gp, 266-6711 Turbocharger Gp, 4P-4606 Turbocharger Gp, 6I-2087 Turbocharger Gp, and 6I-3959 Turbocharger Gp
Item Qty Part Specification description
1 8 168-7800 Locknut Before assembly, apply Loctite C5A copper anti-seize to threads and bearing surfaces.
Torque to 54 5 N m (40 4 lb ft).
2 - 7W-2297 Clamp As Use the following procedure to tighten the clamp assemblies:
1. Tighten the clamp assemblies to 14.0 1.5 N m (123.9 13.3 lb in).
2. Gently hit around the clamp assemblies with a soft hammer.
3. Again, tighten the clamp assemblies to 14.0 1.5 N m (123.9 13.3 lb in).
3 - 6V-2751 High Temperature Bolt Tighten the bolts to 20.0 1.5 N m (177.0 13.3 lb in)
4 - - Install the rings so that the breaks in the rings are not aligned. Rotate the rings for approximately 45 degrees from one ring to the next ring.