HOSE 3322969 - Caterpillar

Illustration 43 g00593506
Remove the bolt and the washer that secures two clips (109) and (110) to the channel assembly. Remove clip (109) from hose assembly (104). Remove clip (110) from hose assembly (97) .
Illustration 44 g00593508
Illustration 45 g00593512
Remove the bolt and the washer that secures clip (111) to the channel assembly. Remove clip (111) from the wiring harness.
Attach Tooling (A) to the two door assemblies. Position a suitable lifting device to Tooling (A). Secure the suitable lifting device to a hoist.
Remove eight bolts (112) and the washers that secure the channel assembly to the platform.
Remove the channel assembly and the door assemblies from the platform. The weight of the channel assembly and the door assemblies is 73 kg (160 lb).
Illustration 46 g00593514
The view is along the right side of the engine end frame behind the rear cab support assembly.
Remove the bolt, the washers, and the nut that secures clip (113) to the bracket. Remove clip (113) from the hose assemblies.
Remove the bolt and the washer that secures clip (114) to the engine end frame. Remove clip (114) from the wiring harness.
Remove the bolt, the washers, and the nut that secures clip (115) to the bracket. Remove clip (115) from the hose assemblies.
Illustration 47 g00593516
The view is along the left side of the engine end frame behind the rear cab support assembly.
Remove the bolt, the washers, and the nut that secures clip (116) to the bracket. Remove clip (116) from the hose assemblies.
Remove the bolt, the washers, and the nut that secures clamp (117) to the bracket. Remove clamp (117) from the hose assembly.
Illustration 48 g00593517
Attach a suitable lifting device around center bracket assembly (118). Secure the suitable lifting device to a hoist.
Remove four bolts (119), the washers, the mount assemblies, and the nuts that secure center bracket assembly (118) to the engine end frame.
Remove six bolts (120) that secure center bracket assembly (118) to the output transfer gear case.
Remove center bracket assembly (118) from the output transfer gear case. The weight of center bracket assembly (118) is 152 kg (335 lb).
Illustration 49 g00593518
Attach Tooling (B) to output transfer gear case (121). Position a suitable lifting device to Tooling (B). Secure the suitable lifting device to a hoist.
Illustration 50 g00593520
Remove four bolts (122) and the washers that secure manifold (123) and the seal to the steering cylinder.
Disconnect manifold (123) and the seal from the steering cylinder. Position manifold (123) for the removal of the transmission and output transfer gear and case.
Illustration 51 g00593522
Remove four bolts (124) and the washers that secure manifold (125) and the seal to the steering cylinder.
Disconnect manifold (125) and the seal from the steering cylinder. Position manifold (125) for the removal of the transmission and output transfer gear and case.
Illustration 52 g00593524
Remove two bolts (126), the washers, the mounts, and the nuts that secure mounting bracket (127) to output transfer gear case (121) to the engine end frame.
Repeat the procedure for the mounting bracket on the remaining side of output transfer gear case (121). Raise output transfer gear case (121) in order to access the