HOSE & TUBE AS 3340019 - Caterpillar

Illustration 1 g01392303
Illustration 2 g01392304
View A-A
When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 7643 1683 rpmCurrent draw ... 76.5 14.5 AmpVoltage ... 23V (B) Clearance between the pinion and the housing ... 9.1 mm (0.36 inch) (1) Final installation torque for the ground terminal nut ... 30.5 3.5 N m (270 30 lb in) (2) Final installation torque for the ground terminal nut ... 2.25 0.25 N m (20 2 lb in)Note: A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (3). A maximum of two of the cable terminals may be equal to or greater than 0 AWG. (3) Final installation torque for the battery terminal nut ... 30.5 3.5 N m (270 30 lb in)Note: The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (4) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in) (5) Final installation torque for the motor terminal nut ... 30.5 3.5 N m (270 30 lb in) (6) Final installation torque for the motor frame terminal nut ... 8 3 N m (70 27 lb in)Solenoid assemblyCurrent consumption at 20V and 25 °C (77 °F) Pull-in windings ... 57 AmpHold-in windings ... 16 AmpMaximum rated current ... 850 Amp